Shindaiwa X7502235300, PB270 manual Gearcase Lubrication

Page 16

Maintenance (continued)

300-hour maintenance

Gearcase Lubrication

The gearcase should be filled with 60 cc (2.0 fl.oz.) of Mobil SHC634 Synthetic Gear Oil. A maximum of 75-80 cc can be used, but never to exceed 80 cc. Opera- tion with excessive oil level will result in high operating temperatures. Do not overfill!

WARNING!

BURN DANGER! The gearcase will be extremely hot after

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn gearcase side plate to break the seal

 

Fill the gearcase to the bottom of the

and lift the plate from the gearcase

 

chamfer on the output gear.

 

 

 

 

 

 

 

 

DO NOT OVERFILL!

 

 

 

 

 

 

 

 

 

 

 

 

 

use!

Replacing the gearcase oil

1.Disconnect spark plug wire at engine.

2.Remove the LH Drum and axle assembly (as viewed from the operat- ing position). Wipe the sideplate clean and remove four screws (it is not nec- essary to remove the gearcase from the outer tube).

3.Turn gearcase side plate to break the seal and lift the plate from the gearcase.

NOTE:

It may be necessary to use a heat gun to soften the sealer material.

4.Turn the gearcase to the LH side and and allow all used gearcase oil to drain into a small container.

5.Place the gearcase on the RH side and supported so the outer tube is parallel to the ground. Refill the gearcase with 60 cc (2.0 fl.oz) of Mobil SHC634 Synthetic Gear Oil to the bottom of the chamfer on the output gear. The correct oil depth is 5/8" (15.5 mm). DO NOT OVERFILL!

6.Inspect the sideplate for damage and clean off all remaining liquid gasket material with brake cleaner or acetone. Coat the outer sealing flange of the sideplate with Loctite Ultragrey Silicon Sealant or Threebond No. 1104 Liq- uid Gasket.

7.Replace the cover and install the four sideplate screws. Tighten securely.

8.Reinstall the drum and axle assem- bly. Refer to the section “Assembly: Sweeper Assembly” for instructions.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PB270 Powerbroom Contents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to assemblyConnect the Outer Tube to the Powerhead Throttle Cable and Ignition LeadsAdjustable Handle Installation Throttle lever free playSweeper Assembly Mixing Fuel Fuel RequirementsFilling the fuel tank Minimize the Risk of FireWhen the Engine Starts Starting the EngineAdjusting Engine Idle Idle Speed AdjustmentStopping the Engine Checking Unit ConditionOptional accessories OperatingBreak-in and Operation Operating TechniquesMaintenance 10/15-Hour Maintenance Remove and clean or replace the spark plugGearcase Lubrication Muffler Maintenance Long Term StorageTroubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions 99922201031 02/05/2010 01/2010 Page Page Page Page Servicing Information Parts/Serial Number

PB270, X7502235300 specifications

The Shindaiwa X7502235300, also known as the PB270, is a robust and versatile backpack blower tailored for both professional landscapers and homeowners seeking efficiency in outdoor maintenance. This model is engineered to handle a wide range of tasks, from clearing leaves and debris to maintaining garden aesthetics.

One of the standout features of the PB270 is its powerful engine, which boasts a displacement of 25.4cc. This 2-stroke engine is designed to deliver high performance with low emissions, making it both environmentally friendly and compliant with stringent regulations. The blower's exceptional fuel efficiency ensures longer operational times, allowing users to tackle larger areas without frequent refueling.

In addition to its impressive power, the PB270 is equipped with a lightweight design that significantly enhances user comfort during extended use. Weighing in at just over 10 pounds, it incorporates adjustable padded shoulder straps and a cushioned back panel, reducing fatigue and improving user experience. The ergonomic layout ensures that the weight is evenly distributed, enabling users to maneuver easily while navigating tight spaces.

The X7502235300 features a unique jet fan technology that generates a high-speed airflow of up to 150 miles per hour. This innovative design maximizes air volume and velocity, allowing users to effortlessly clear leaves, grass clippings, and debris from driveways, sidewalks, and gardens. The variable speed control further enhances versatility, letting users adjust the airflow to suit the specific task at hand.

Additionally, Shindaiwa emphasizes ease of use in the PB270 with its simplified starting system. The easy-start technology minimizes rope resistance, ensuring quick and reliable starts even in cold conditions. Maintenance is user-friendly as well, featuring a tool-less air filter access and a removable spark plug for quick servicing.

Durability is another significant characteristic of the PB270. It is constructed with high-quality materials designed to withstand harsh outdoor conditions, ensuring longevity and dependable performance. The product is backed by Shindaiwa's reputation for excellence, making it a trusted choice for those seeking a reliable backpack blower.

In summary, the Shindaiwa X7502235300, PB270 brings together power, efficiency, and user-friendly features in a compact design. With its potent engine, innovative technology, and ergonomic considerations, it stands as an excellent option for both professional landscapers and homeowners looking to maintain their outdoor spaces effectively.
Top Page Image Contents