Shindaiwa 80732, PB2500 manual Emission System Warranty Statement

Page 19

Emission System Warranty Statement

Your Warranty Rights and

Obligations

The California Air Resources Board, the U.S. Environmental Protection Agency and Shindaiwa Kogyo Co., Ltd. are pleased to explain the emission control system warranty on your new small off-road (non-road) engine.

In California, new small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. In other states, new 1997 and later non-road engines must meet the Federal EPA’s stringent anti-smog standards. Shindaiwa Kogyo Co., Ltd. must warrant the emission control system on your small off-road engine for the periods of time listed below, provided there has been no abuse, neglect, or improper maintenance of your small off-road engine.

Your engine emission control system includes parts such as the carburetor, the ignition system and, if equipped, the catalytic converter. These components are specifically listed below.

Where a warrantable condition exists, Shindaiwa Kogyo Co., Ltd. will repair your small off-road engine at no cost to you including diagnosis, parts, and labor.

Manufacturer’s Warranty

Coverage

When sold within the U.S., this engine’s emission control system is warranted for a period of two (2) years from the date this product is first delivered to the original retail purchaser.

During the warranty period, Shindaiwa Kogyo Co., Ltd. will, at their option, repair or replace any defective emission-related component on this engine. During the original Warranty Period, these Warranty Rights are automatically transferable to subse- quent owners of this product.

What is Covered by this

Warranty

1.Carburetor Internal Components

■Throttle Valve, Needle, Jet, Metering Diaphragm

2.Ignition System Components

■Ignition Coil

■Flywheel Rotor

3.Catalytic Converter (if originally equipped)

The emission control system for your particular Shindaiwa engine may also include certain related hoses

and connectors.

Owners Warranty

Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in this owners manual. Shindaiwa Kogyo Co., Ltd. recommends that you retain all receipts covering maintenance on your small off- road engine, but Shindaiwa Kogyo Co., Ltd. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should be aware, however, that Shindaiwa Kogyo Co., Ltd. may deny you war- ranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications.

You are responsible for presenting your small off-road engine to an authorized Shindaiwa Dealer as soon as a problem exists. The warranty repairs should be completed in a reason- able amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a Shindaiwa customer service representative at (503) 692-3070 or your local Shindaiwa Dealer.

Consequential Damages

In the event that other component parts of this product are damaged by the failure of a warranted part, Shindaiwa Kogyo Co., Ltd. will repair or replace such component parts at no charge to you.

What is Not Covered

■Failures caused by abuse, neglect, or improper maintenance procedures.

■Failures caused by the use of modified or non-approved parts or attachments.

This Warranty is Administered by:

Shindaiwa Inc.

11975 S.W. Herman Rd. Tualatin, OR 97062 (503) 692-3070

ENGLISH

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents PB2500 PowerBroom Introduction ContentsWork Safely General Safety Instructions Checking Unit ConditionStay Alert Be Aware of the Working Environment Properly Equipped OperatorPB2500 Safety LabelsPrior to Assembly SpecificationsUnit Description Connect the Throttle Cable Assembly Mainshaft/PowerheadAssembly Throttle Linkage and Ignition Leads Connect the Outer Tube to PowerheadAssembly Handle Assembly Adjust Throttle Lever Free PlayConnect the Handle to the Outer Tube Gearcase index screw first, then Assembly Gearcase and Sweeper AssemblyMinimize the risk of fire Mixing Fuel Filling the Fuel Tank Break-in and OperationStarting the Engine When the Engine StartsStopping the Engine Idle Speed Adjustment Adjusting Engine Idle Operating TechniquesDaily Maintenance General MaintenanceHour Maintenance Hour or Annual Maintenance 10/15-Hour MaintenanceGearcase Lubrication Spark Arrester Screen MaintenanceReplacing the gearcase oil 22410-17201 and 60840-98020 optional Long Term Storage Strap and Hanger Debris Shield99909-33021 optional Engine does not Start Troubleshooting GuideAdditional Problems Emission System Warranty Statement Page Balai motorisé PB2500 Table des matières Introduction Les mises en gardesPour réduire les risques de feu Mesures de sécurité générales Vérification de l’appareilTravailler en toute sécurité Demeurer alerteTenir compte de l’environnement de travail ’utilisateur bien équipéÉtiquettes de sécurité Avant l’assemblage Caractéristiques techniquesAssemblage Tringlerie de laccélérateur et câbles dallumage Assemblage Arbre dentraînement / tête motoriséeAssemblage Poignées Assemblage Ajuster le jeu de garde du levier d’accélérationFixer la poignée au tube extérieur Dengrenage. Au besoin, faire pivoter Assemblage Boîtier et balaiExemples de mélange Carburant Remplir le réservoir Rodage et utilisationArrêt du moteur Démarrage du moteurLorsque le moteur démarre Ajustement du ralenti Réglage du ralenti du moteur Techniques de fonctionnementEntretien quotidien EntretienEntretien aux 10 heures Entretien aux 50 heures Entretien aux 10 à 15 heuresEntretien annuel ou aux 135 heures Changer lhuile du boîtier dengrenage Entretien du pare-étincellesEntretien aux 300 heures Lubrification du boîtier dengrenage22410-17201 et 60840-98020 optionnel Remisage à long termeBandoulière et anneau dattache Pare-débrisLE Moteur NE Démarre PAS Guide de dépannageAutres Problèmes Guide de dépannage suiteCouverture de la garantie Garantie administrée parDéclaration de garantie du dispositif antipollution Vos droits et obligations en vertu de la garantieShindaiwa Inc

PB2500, 80732 specifications

The Shindaiwa PB2500 is a high-performance backpack blower designed for both professionals and homeowners seeking efficiency in yard maintenance. This model is particularly celebrated for its balance of power, durability, and user comfort, making it an essential tool for tackling leaves, debris, and other outdoor challenges.

One of the standout features of the PB2500 is its powerful 23.9 cc two-stroke engine. This engine delivers a remarkable air volume of 470 cubic feet per minute (CFM) and an air speed of up to 145 miles per hour, providing ample force to handle even the toughest cleanup tasks. The engine is designed for easy starting, thanks to the advanced starting technology that minimizes resistance, allowing users to get to work quickly without the frustration often associated with outdoor power equipment.

In terms of ergonomics, the Shindaiwa PB2500 is engineered with user comfort in mind. The adjustable harness system distributes weight evenly across the shoulders, reducing fatigue during extended use. Additionally, the padded backrest and hip belt further enhance comfort, allowing users to operate the blower for longer periods without discomfort.

The PB2500 is also equipped with advanced anti-vibration technology, which significantly reduces operator fatigue. This feature is particularly important for professionals who spend hours operating their equipment. The blower's design minimizes vibrations transmitted to the user's body, promoting a more comfortable and efficient working experience.

Durability is another critical characteristic of the Shindaiwa PB2500. Constructed with high-quality materials, this blower is built to withstand the rigors of regular use. Its robust design ensures longevity, making it a smart investment for anyone needing an efficient and reliable blower.

Maintenance is straightforward, thanks to Shindaiwa's Engine Management System, which provides optimal performance while minimizing emissions. This technology helps the PB2500 operate efficiently while adhering to environmental standards, making it a more eco-friendly choice among similar devices.

In summary, the Shindaiwa PB2500 is a top-tier backpack blower that combines power, comfort, and durability. Its impressive engine performance, ergonomic design, and low vibration features make it suitable for both professional landscapers and residential users. Whether you are clearing debris from your lawn, garden, or driveway, the PB2500 stands out as a versatile and effective solution for outdoor cleanup tasks.
Top Page Image Contents