Sun Microsystems 3.2 manual Could not determine the host name of the system, Database

Page 48

TABLE 3-1Error Messages for the Sun StorEdge Availability Suite 3.2 Software (Continued)

Error Message

From Meaning

unable to determine hostname: <host>

unable to determine IP addresses for either host <phost> or host <shost>

unable to determine IP addresses for hosts <host1>, <host2>

RM

Could not determine the host name of the system.

RM

The IP address for either the primary host or the

 

secondary host could not be determined.

RM

The IP addresses for the host names specified for the

 

primary or secondary hosts could not be determined.

 

Verify that the host names are in the /etc/hosts file.

unable to determine local hostname PITC

iiadm needed to find out the name of the host it is

 

running on, but was unable to do so.

unable to determine network information for <host>

unable to determin the current Solaris release: <error>

unable to find disk service, <ctag>: <errno>

Unable to find disk service:%s

Unable to find <group> in configuration storage

Unable to find <shost>:<svol> in configuration storage

unable to find SNDR set <shost>:<svol>: in config

Unable to fork

unable to get maxsets value from kernel

unable to get set status before reconfig operation

Unable to initialize the kernel thread set

RM

Network information for the secondary host could not

 

be determined. Verify the settings in the

 

/etc/nsswitch.conf file.

RM

Look at rdc_check_release();

RM

SunCluster could not find the specified disk service.

PITC

iiadm could not determine whether a cluster device

 

group is active on the current host.

RM

Could not find remote mirror group in configuration

 

database while trying to do a diskq operation.

RM

Could not find remote mirror set in configuration

 

database while trying to do a diskq operation.

RM

The remote mirror set is not configured while trying to

 

set autosync, for one of the following reasons:

 

• The set could not be found in the configuration.

 

• The set is not configured in the configuration

 

database.

 

Verify that the set is entered properly and matches a

 

set returned by the sndradm -icommand.

PITC

iiadm ran out of process space.

RM

The remote mirror software failed to read the

 

sndr_max_sets value from the

 

/usr/kernel/drv/rdc.conf file.

RM

The remote mirror software could not get the kernel

 

configuration.

Kernel

The remote mirror software could not initialize a

 

kernel thread. Verify that the system is not running

 

low on memory.

38 Sun StorEdge Availability Suite 3.2 Software Troubleshooting Guide • December 2003

Image 48
Contents Sun Microsystems, Inc Please Recycle Contents Error Messages Preface Before You Read This BookUsing Unix Commands How This Book Is OrganizedShell Prompts Typographic ConventionsShell Shell superuserRelated Documentation Accessing Sun Documentation Contacting Sun Technical SupportSun Welcomes Your Comments Page Troubleshooting Checklist Check for installation errorsReboot Check the log file contentsChecking Log Files Improving PerformanceSafeguarding the Vtoc Information Page Remote Mirror Software Troubleshooting Tips Troubleshooting Log Files and Services Check the integrity of the link Check for common errorsChecking Log Files Checking That the rdc Service Is Running If the /dev/rdc Link Is Not Created Checking the Integrity of the Link Testing with ifconfig Nws822# snoop -d hme0 port rdc Correcting Common User Errors Enabled Software on Only One HostWrong Volume Set Name Specified Using the dsstat Command Incorrectly To Find the Volume Set Name Accommodating Memory RequirementsRemote Mirror Software Troubleshooting Tips Page Iiadm was expecting a number to be on the command Line. This happens when the copy parameters optionIs used but the arguments for units and delay are Contains the volumes does not match the cluster tagOverflow volume could not be attached to Specified set. Possible errorsDsweempty No overflow volume was specified Dsweinuse The overflow volume is already beingVolume requested as a bitmap for the remote Mirror set is already configured to be used byVolume requested as a remote mirror bitmap Volume is already configured to be a volume used byRemote mirror set cannot be found in the configuration Database. The set is not configured. Check the entry forErrors Primary volume has a file system mounted on itKernel Set being enabled or resumed has a secondary Volume that is already in use as a secondary volumeFor another remote mirror set. a volume cannot be Enabled as a secondary volume if it is already in use asCopy or update operation could not be initiated Possible errorsDsweempty No set was specified on the command Dsweoffline One or more volumes in the set isAn overflow volume couldn’t be initialized. Possible Dsweinuse The volume that was specified is alreadyVolume Dswersrvfail The kernel was unable to accessKernel Request to disable the disk queue is already Unsuccessfully before attempting to disable the diskIiadm command must be issued on the other Where the iiadm command was issuedDisk queue volume specified for Reconfiguration operation is already in use byRemote mirror software as a data volume or bitmap Iiadm -ecommand expected dep or indCould not enable volume. Possible errors New sets can be enabledDsweempty One of the volumes names master Dsweinuse One of the volumes master, shadowIiadm had a problem detaching the overflow volume From a set. Possible errorsDsweodependency The overflow volume is still Going from logging mode to replicating modeCould not import shadow volume. Possible errors Sets can be enabledDsweempty One of the volume names is blank. File a Dsweinuse One of the volumes is already in use byCould not join shadow volume back to the set. Possible Dsweempty a volume was missing on the commandTrying to join the volume is not in the exported state Dsweinvalbmp The bitmap volume is not bigUser attempted to enable a set using the shostsvol Set specified for the command cannot be foundCurrent configuration. Check the set to ensure that It matches one of the configured sets. Use sndradmIiadm could not get a list of overflow volumes from Kernel. Possible errorsVolume the user specified to attach to a compact Master, shadow, or bitmap volumeDisk queue replace command can also be used to Size of the secondary volume. Verify thatSecondary volume is not in an error state and can be AccessedUser attempted to perform a copy or update Volume specified as the shadow volume is alreadyUse as an attached overflow volume Use as a shadow for a different master volumeUser attempted to enable a set in which Volume was already enabled, but with a differentVolume in the remote mirror set Dswenotfound Could not find specified volumeDuring an enable operation, iiadm tried to validate Bitmap device, but could not get access to itMaster device, but could not get access to it During a reset operation, iiadm was unable to findBe determined. Verify the settings SunCluster could not find the specified disk serviceCould not find remote mirror group in configuration Could not find remote mirror set in configurationLookup of the set ID in the configuration database for Volume specified for the bitmap could not beOpened. The volume might not exist or is already Iiadm attempted to access the configuration fileOne or more volumes in a group copy or update Command failed. Possible errorsSame as Update failed meaning but for a specific During a reset, iiadm tried to updateVolumes are not all in the same cluster device group Volume vol is not being managed byIiadm detected that the master, shadow, and bitmap As required by the point-in-time copy softwareRelated Error Messages

3.2 specifications

Sun Microsystems 3.2, often referred to as SunOS 3.2, was a notable release of the Sun operating system that emerged during the rapidly evolving landscape of computer technology in the early 1980s. This operating platform was designed specifically for Sun Workstations, utilizing the robust hardware architecture developed by Sun Microsystems. The introduction of SunOS 3.2 marked a significant step forward in the development of UNIX-like operating systems optimized for entrepreneurship and scientific applications.

One of the main features of SunOS 3.2 was its adherence to the Berkeley Software Distribution (BSD) model, which allowed for advanced networking capabilities, enhanced performance, and efficient resource management. BSD's influence provided SunOS 3.2 with TCP/IP networking protocols, allowing users to connect to other devices seamlessly and manage network resources easily. This feature was crucial during a time when networking was becoming increasingly vital for organizations.

The system's support for virtual memory was another innovative characteristic. SunOS 3.2 utilized demand paging, which allowed programs to use more memory than was physically installed on their machines, significantly improving multitasking and overall system responsiveness. This capability was particularly advantageous for enterprises that relied on large-scale computations and data analysis.

SunOS 3.2 also introduced support for the Sun Window System, which meant users could utilize graphical user interfaces for interacting with applications, moving away from purely text-based command interfaces. This transition paved the way for more intuitive user experiences in the realm of computing, making powerful UNIX capabilities more accessible.

The inclusion of software utilities such as the C shell (csh) and a variety of development tools further strengthened SunOS 3.2’s position as a suitable platform for developers. The system provided robust development environments for programming in languages like C and assembly, catering to custom application requirements across different industries.

Lastly, security features were integrated into SunOS 3.2 to safeguard sensitive data and enhance system integrity. Permission settings and user authentication mechanisms were refined, allowing organizations to securely manage their computing resources.

In summary, SunOS 3.2 represented a landmark evolution in operating systems, showcasing a blend of advanced networking, memory management, graphical user interface, development tools, and security—elements that defined a generation of computing within the high-performance ecosystem of Sun Microsystems.