WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775)
fax: (775)
www.wellsbloomfield.com
SERVICE BULLETIN
102.004
TO: | Wells Authorized Service Agencies | December 12, 2002 |
FROM: | Hanju Lee, National Service Manager |
|
SUBJECT: | Magnetic Door Latch p/n 63946 - Replacement Parts |
|
|
|
|
|
|
|
The following parts are available individually for the Magnetic Door Latch Assembly (p/n 63946):
PIN INSTALLATION INSTRUCTIONS
P/N Description
63946 Handle Assy Complete
65050 Grip, Vinyl
67527 Strike Assy
505774 Pin, Tongue
505775 Pin, Magnet
Pin Installation Instructions
1.Insert spring into recess in handle.
2.Note orientation of tongue. Press tongue against spring until holes line up.
3.Insert tongue pin from door side of handle.
Insert non-serrated end first. Press in until flush.
4.Assemble magnet.
Note: Offset hole in rubber section goes toward rear of handle.
5.Insert magnet into handle until holes line up.
6.Insert magnet pin from door side of handle.
Insert
7.Remount handle on door.
SvcB 102.004 | 1 of 1 | 121202 cps |