THREADING THE REST OF YOUR MACHINE

Upper threading ...

needle threading ...

now quick and easy

7

C)Making certain that needle is

in its highest position, thread it from front to back.

B)Now pull thread toward you

into Top-Threading Path (14), down to Tension Spring (13) -- diagram above, Pull thread up into spring. Then draw thread through

stotted take-up ]ever (t5} and down again through either side of lower thread guide (1t).

D) Holding the needle thread with

the left hand, and basting button pushed, gently tap the foot control. A single stitch will be made. This brings the bobbin thread up to the top surface forming a loop. Reach into this loop with a long instrument like a screwdriver and pug loop free, Then pull three or four inches of both top and bobbin threads behind the needle.

Page 8
Image 8
Kenmore 1791 manual Threading the Rest of Your Machine, Upper threading, Needle threading, Now quick and easy