CLEANING YOUR
MACHgNE AND
KEEPING IT CLEAN
A clean machine
sews better...
runs smoother...
lasts longer
It takes a little time
The small brush can be used to clean in and around the feed dogs and shuttle area to remove accumulated dust and lint. This is specially important when you're working with knits and fabrics with nap that tend to shed more than woven fabrics.
Cleaning shuttle area. On rare occasions, you may want to clean the shuttle area. Just follow these s_mp_e steps ,..
FEED DOGS
Lift out bobbin case from front,
SCREW FREE-ARM COVER
Turn hand wheel toward you until needle bar (8} is at its highest position and pointed hook at 12 o'clock (under feed dogs). Pull out two locking wings in direction of arrows.
NOTICE: Two black screws should not be removed.
Step3
Tilt machine head back and remove