Kenmore 1791 manual Zippers That are SMOOTH-WORKING Good Looking

ZIPPERS THAT ARE SMOOTH-WORKING,

GOOD LOOKING

i i

I

i

i

I

!

Home-sewn zippers can look as nice as those on ex-

pensive ready-mades. We recommend you follow di- rections given on zipper package. There are two basic types: conventional, and invisible. Your Zipper Foot

will assist you with any of these installations. Use these simple settings:

For	conventional			zippers ...		Your		zipper		REGULAR
foot	is adjustable			for use on right			or	left	side	ZIPPER
of needle.			Adjust	foot so needle			clears		side
notch		on	foot. Then		proceed	according to
zipper		manufacturer's			instructions.

Invisible zippers are applied to an open

seam, to seam allowances only; there is no stitching visible on outside of garment. Ad- just zipper foot so needle is sewrng through center hole of foot and one groove of foot is riding on teeth of zipper, After zipper inser- tion, finish by shifting foot to side position and sewing through side notch.

CORDING IS SIMPLE WITH SAME "ZIPPER" SETTINGS

Your zipper foot also makes it easy to add

"cording" to garments as well as slip cov-

ers, toss pillows, bedspreads, decorative

pieces. Cut fabric on bias and wrap around

cord. Pin fabric in place so seam edges are ""_'_-

even. With zipper foot to left of needle, stitch close to cord.

28