GETTING READY TO SEW

SETrlNG UP YOUR MACHINE

When you open your Kenmore carton, you'll find the basic machine, foot control, the instruction book you now are reading, and one box of attachments {Accessories end ButtonholerL Set your machine on a sturdy flat surface. Be sure to wipe off any excess oil that may have accumulated in shipping,

Step 1: The spool pins

You'tlfind Spool Pins (32) packed in the Accassones and Buttonholer

Box. Using a screwdriver, attach them securely at rear as indicated.

Step 2: The electrlclty

Plug Foot Controt {46) into Cord Connection {26). Then, connect cord into any 110-120volt wall outlet.

Important safety notes

Your machine will not operate unless

the Power/Light Switch (28) is turned on. This same switch controls

the machine power, sewing light, the!llt_i indicator lights on the stitch selection

panel (20) and needle controls (24 and 25). If you are interrupted or stop sewing, turn off the switch-this is an

important safety feature that prevents accidents.

Page 4
Image 4
Kenmore 1791 manual SETrlNG UP Your Machine, Getting Ready to SEW