Maintenance

DAILY MAINTENANCE:

(At the end of each working day) :

1)Flush the entire system, including floor tool, hand tool, etc., with 1 to 3 gallons of clean, hot water.

2)Vacuum out the solution tank .

3)Rinse tank with fresh water. Periodically inspect the recovery tank and decontaminate if necessary, using a Hospital Grade Virucide or a 1-10 bleach to water solution. Waste water should be disposed of properly.

4)Remove lint build-up from the float shut-off screen in the recovery tank . (Occasionally check filter screen at the bottom of the solution tank and rinse clean with hot water if necessary).

5)Inspect hoses for wear. Frayed or cracked hoses should be replaced to avoid vacuum or solution pressure loss.

6)Inspect power cord for wear or damage. This cable will lay on wet carpet. To prevent electrical shock replace cords that are frayed or have cracked insulation immediately.

7)Ensure automatic shut-off ball is working properly.

8)Clean all dirt and obstructions from drain valve and gaskets to prevent possible leakage and premature wear.

9)Run clean water through solution pump when work is complete.

10)Empty both tanks and rinse, run vacuum(s) for at least one minute to dry motor(s).

11)Store with access covers removed to allow tanks to dry.

PERIODIC MAINTENANCE

1)Twice a month, flush a white vinegar solution (One quart vinegar to two gallons of water) or anti-browning solution (mixed as directed) through the extractor, turning pump switch on/off several times, flush with clean water. This will prevent build-up of alkaline residue in the system.

2)Check hoses for wear, blockages, or damage. Frayed or cracked hoses should be repaired or replaced to eliminate vacuum or solution pressure loss.

3)Check all handles, switches, knobs, electrical cables and connections on your machine for damage. If the cable insulation is broken or frayed, repair or replace it immediately. Don’t take chances with electrical fire or shock.

4)Clean out solution tank and remove and clean solution screen.

5)Clean outside of all tanks and check for damage.

Monthly Maintenance

1)Check all bearings for noise and wear.

2)Check all gaskets for wear and leakage.

3)Check pump pressure; observe spray pattern and check with gauge if necessary.

4)Check overall performance of machine.

SEMI-ANNUALLY

1) Check vacuum motor brushes.

4-1	D100 86038620 05/21/07

D100, 10070090 specifications

The Windsor D100, model number 10070090, is a cutting-edge cleaning machine designed for efficiency and effectiveness in maintaining various floor types. As part of Windsor’s iconic line of cleaning solutions, the D100 stands out due to its innovative features, advanced technologies, and exceptional design characteristics that cater to the needs of professional cleaning teams and facility managers.

One of the main features of the Windsor D100 is its powerful motor, which delivers high suction capabilities, ensuring thorough dirt and debris removal from carpets, hard floors, and other surfaces. The machine operates quietly, making it suitable for use in noise-sensitive environments such as hotels, offices, and healthcare facilities. With a lightweight design, the D100 is easy to maneuver around furniture and obstacles, enhancing the overall cleaning experience.

The D100 also incorporates a robust filtration system, complete with HEPA filters, which captures even the smallest allergens and particles. This is crucial for maintaining air quality, particularly in spaces where individuals may have allergies or respiratory issues. The smart engineering of the filtration system ensures that maintenance is straightforward, with easy access to filter replacement, allowing for consistent performance over time.

In terms of technology, the Windsor D100 employs advanced electronic controls that enable users to customize settings based on cleaning requirements. The machine is equipped with intelligent sensors that automatically adjust suction power when transitioning between different floor types, optimizing cleaning efficiency while conserving energy. This user-friendly interface is designed to simplify operation and enhance productivity.

Another notable characteristic of the Windsor D100 is its durable construction. Built with high-quality materials, the machine is engineered to withstand the rigors of daily use in demanding commercial environments. The sturdy design not only increases the lifespan of the unit but also minimizes maintenance costs over time.

In summary, the Windsor D100 (10070090) combines powerful cleaning performance with advanced technology and user-friendly features. It addresses the diverse needs of professional cleaning tasks while providing excellent filtration and longevity. As a result, it remains a popular choice among commercial cleaning services and businesses looking to maintain clean and hygienic spaces.