Windsor SPD-J manual Troubleshooting Chart

Page 11

 

Troubleshooting Chart

Condition

Corrective Action

Accessory Tool Fitting Difficult to Connect:

Corrosion on fitting

Clean with steel wool.

Remove and soak in acetic acid (white vinegar).

Lubricate lightly with silicone base lubricant.

Floor Not Getting Clean:

Severe soil conditions

Floor Too Wet:

Worn spray jet(s)

Floor Not Getting Wet:

Solution filter screen clogged

Spray jet(s) clogged

Pump not running

Faulty pump

Solution valve adjustment

Brush Not Turning:

Belt broken

Faulty switch

Faulty circuit breaker

Faulty brush motor

Worn Bearings:

Squeeling or grinding sound in brush housing

Make several passes at right angles to each other.

Use a prespray.

Replace spray jets which are producing more than a fine mist.

Clean solution filter screen located inside lower tank near the front.

Clean or replace jets.

Do not use a wire to clean jet.

Damaged jets will cause over-saturation.

Check for and correct any loose wires

Repair or replace

Adjust solution valve cable until valve operates when handle is pulled.

Remove belt cover on right side of machine. Inspect belt. Replace if necessary.

Replace.

Replace.

If the belt, circuit breaker, and switch have been tested and found to be in good working order, the brush motor may need to be replaced.

Replace bearings.

98353 7/1/97

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Important Safety Instructions Advertissement Controls Preparing the Spirit Dual For Hard Floor Filling Solution TankSpirit General Cleaning Information To Use an Accessory ToolApproved Accessory Tools Plan Cleaning RouteDailv Maintenance Suggested Service Parts ListPeriodic Maintenance Troubleshooting Chart Troubleshooting Chart Servicing the Vac Motor Wire TerminalReverse Vac Shoe AssemblyRecovery & Solution Tanks Recovery & Tank Assembly Parts List Spray Jets Pump...Manifold...VaIveOpen HANDLE...CHASSIS...SWITCHES HANDLE,..CHASSIS...SWITCHES Parts List Brush Drive Assembly Brush Drive Assembly Parts List Vac Motor Assemblv Roller Vac Motor Roller Assembly Spirit Dual Squeegee Assembly 115V SPR Wiring Diagram Limited Warranty

SPD-J, SPD specifications

Windsor SPD and SPD-J are advanced power distribution systems designed with a focus on efficiency, reliability, and innovation. Windsor SPD, also known as Surge Protective Device, is engineered to protect electrical systems from voltage spikes that can result from lightning strikes, power surges, or other disturbances. This device is crucial for safeguarding sensitive electronic equipment used in various industries, from telecommunications to healthcare.

One of the main features of the Windsor SPD is its multi-level protection mechanism. It employs a tiered approach that combines several surge protection technologies, including metal oxide varistors (MOVs), gas discharge tubes (GDTs), and transient voltage suppressors (TVS). This combination not only enhances performance but also extends the lifespan of the protective equipment, effectively minimizing the risk of failure during transient events.

The SPD-J model introduces added functionalities and improved integration capabilities. It includes an intuitive monitoring interface that provides real-time insights into system performance and surge events. This data is crucial for facility managers as it enables them to assess the effectiveness of surge protection and make informed decisions about maintenance and upgrades.

Both the Windsor SPD and SPD-J feature compact designs that allow for easy installation in various settings, including residential, commercial, and industrial environments. Their robust construction ensures compliance with international safety standards, providing users with peace of mind regarding their efficacy.

In terms of technology, these devices are equipped with remote monitoring capabilities. Users can access performance data via web applications, enabling proactive management of electrical systems. Additionally, they are designed to integrate seamlessly with existing electrical infrastructure, making them a versatile solution for enhancing overall system resilience.

Regarding characteristics, the devices boast high energy absorption ratings, which define their ability to withstand and dissipate surges without compromising performance. The SPD and SPD-J are also designed to operate in a wide range of temperatures, ensuring reliability in diverse climate conditions.

In summary, Windsor SPD and SPD-J stand out in the field of surge protection technologies for their effective, user-friendly, and reliable solutions. As power demands continue to grow, these systems play an essential role in maintaining the integrity and safety of electrical systems across various sectors.
Top Page Image Contents