Windsor CMPSR 10070080, CMPS 10070050 manual Technical Specifications

				TECHNICAL SPECIFICATIONS
ITEM			DIMENSION/CAPACITY
Electrical			115V, 12A, 60HZ
Electric Pump Motor			1/3hp, 1725rpm
Solution Pump			500psi (34 bars), Axial plunger
Electric Vacuum Motor			2stage, 1.25hp (2.80m3/min.)
Waterlift			82 in. (208 cm)
Solution Capacity			29 gallons (111L)
Recovery Capacity			19 gallons (70L)
Wheels
-	Front (2)		6 in. dia. (15.24cm) X 1.5
-	Rear (2)		12 in. dia. ( 30.48cm)X 1.75
Dimensions – Weight (CMPS)			155 lb. (70kg)
Dimensions – Weight (CMPSR)			157 lb. (71kg)
Dimensions – Length (CMPS)			36 in. (91.4cm)
Dimensions – Length (CMPSR)			41.5 (105.4 cm)
Dimensions - Height			43 in. (109.2cm)
Dimensions - Width			24.75 in. (62.87cm)
Power Cable			50 ft. (127m) 14 gauge
		LENGTH
		CMPSR*

HEIGHT

LENGTH

CMPS

SIDE VIEW

WIDTH

FRONT VIEW

*NOTE: Hose rack standard ONLY on CMPSR.

SPECIAL NOTES:

The sound pressure level at 1m from the machine was measured to be 79 dBA. This was a nearfield, broadband measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of impact noise. The instantaneous sound pressure is below 63 Pa.

The weighted root mean square acceleration at the operator’s arms was measured to be below 2.5m/s2. This was a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measurement and related calculations were made in accordance with ANSI S3.34-T986.

CMPS 86290230 02/22/07 3-1