Windsor 10070470, 10070460, 621-222MO, 621-225MO manual Hazard Intensity Level

Page 6

HAZARD INTENSITY LEVEL

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNINGand CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

!

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

!

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine.

.

2-2

NINJA INTL 86038610 03/29/07

Image 6
Contents Portable EXTRACTOR-240V Machine Data LOG/OVERVIEW Your DealerOverview Table of Contents HOW to USE this Manual ModelImportant Safety Instructions Read ALL Instructions Before Using this MachineHazard Intensity Level Hazard Intensity LevelSafety Label Location Extension Cords Grounding InstructionsElectrical Grounding InstructionsThis page Left Blank Intentionally Technical Specifications MeasureControls Machine Operation PRE-RUN InspectionMaintenance Unplug power cords before servicing or making any repairsVacuum Motor Replacement Pump Replacement Kits 200 PSI Pump Replacement Kits 500 PSILubricate U-CUP with Superlube Monthly Pressure RegulatorTroubleshooting Frame Group 200 PSI Hinge SET Chrome Frame Group 500 PSI ELBOW, 1/4 NPT X 45D Street Open Pump Group 200 PSI CLAMP, 3/8 Hose D-SLOT Pump Group 500 PSI HOSEBARB, 3/8 MPT X 1/2 DL Recovery & Solution Tank Group LID, NJA DLX LT GRY ALL Vacuum Motor Group Spacer Nylon 1/4ID X 1/2OD Wiring Group 200 PSI Wiring Group 500 PSI