Yeoman DEVON 50 manual Site Requirements, Flue or Chimney, Flue Plate, Additional

Page 17

SITE REQUIREMENTS

1.FLUE OR CHIMNEY

1.1The flue or chimney system must be in good condition.

It must be inspected by a competent person and passed for use with the appliance before installation.

Products of combustion entering the room can cause serious health risks.

1.2The following must be checked:

—The construction of the masonry chimneys, flue block chimneys and connecting flue pipe system must meet the requirements of the Building Regulations†.

—A flexible flue liner system can be used if certified for use with solid fuel systems and installation complies with manufacturer’s instructions and Building Regulations†. The flue liner must be replaced when an appliance is replaced, unless proven to be recently installed and in good condition.

—If it is necessary to fit a register plate it must conform to the Building Regulations†.

—The minimum height of the flue or chimney must be 4.5m from the hearth to the top of the flue, with no horizontal sections and a maximum of 4 bends. Bends must have angles of less than 45 degrees from the vertical.

—Ensure the connecting flue pipe is kept a suitable distance from any combustible material and does not form part of the supporting structure of the building.

—Make provision to remove the appliance without the need to dismantle the chimney.

—Any existing flue must be confirmed as suitable for

the new intended use as defined in the Building Regulations†.

—The flue or chimney systems must be inspected and swept to confirm the system is structurally sound and free from obstructions**.

—If the chimney is believed to have previously served an open fire it must be swept a second time within a month of regular use after installation to clear any soot falls that may have occurred due to difference in combustion levels.

—The flue exit from the building must comply with local building control rules†.

—Do not connect or share the flue or chimney system with another heating appliance.

1.3Do not connect to systems containing large voids or spaces over 230mm square.

1.4Suitable access must be provided to enable the collection and removal of debris.

1.5The flue must be swept and inspected when the appliance is installed.

1.6The flue draught must be checked with all windows and doors closed and any extraction fans in this, or adjoining rooms, running at maximum speed (see next section for additional ventilation requirements).

Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg

In the U.K.

*The design of the flue and chimney systems and products used should meet the requirements of ADJ along with any other relevant, National or European standards that may apply. Products should be specified with regard to the type of appliance, position within the building, fuels to be used and appliance operating temperatures.

**This should be done by a HETAS Approved Chimney Sweep (UK only) see page 14 / INFO registered (Republic of Ireland only) who will issue you with a certificate.

†Building Regulations Document J

Flue Plate:

Where a hearth, fireplace, flue or chimney is provided or extended (including cases where a flue is provided as part of refurbishment work) information essential to the correct appliance and use of these should be permanently posted in the building, to meet Requirement J4 of the Building Regulations (England and Wales) F3.12 (Scotland).

Additional:

A new factory made system that complies to EN 1856; Part 1 can be used providing installation is to the requirements of:

i)BS 7566 Parts 1 - 4

ii)the manufacturer's instructions

iii)Building Regulations.

For a guide containing information on Chimneys and Flues contact:

The British Flue & Chimney Manufacturers’ Association,

FETA

2 Waltham Court

Milley Lane

Hare Hatch

Reading

Berkshire RG10 9TH

Tel: 0118 9403416

e-mail: info@feta.co.uk

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Models Yeoman Devon 50/county 60/county High Output Boiler StovesContents Installation Engineer Appliance Commissioning ChecklistRetailer appliance was purchased from Essential Information Must be completedGeneral Points User InstructionsSerial Number ThermostatHeating System controls Airwash & Primary AIR CONTROLSUse a protected gloved hand to operate Do not Open the Door with Bare HandsCondensation Using the Appliance for the First TimeRecommended Fuels Normal RunningRunning The appliance Lighting the ApplianceBurning Solid Fuel RefuellingDo not load above the log guard or base of baffle Burning tips Thermostat OperationWood burning tray ASH RemovalWood Multi-fuelChimney fire Extended burningOVER-FIRING Cleaning Glass General CleaningChimney Sweeping Care of stoveSeasonal use Troubleshooting tipsYeoman TECHNICAL SPECIFICATIONPacking List Boiler Output ChartsStandard Features County Yeoman DimensionsDescription Model Dia Devon Flue or Chimney Site RequirementsMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue PlateFlue Outlet Positions Hearth DimensionsRequirement for the walls Walls Next to a HearthFlues Model PRE-INSTALLATION ChecksVentilation Installing the Appliance Installation InstructionsTop flue pipe installation Legal requirementsDo not use a 90˚ elbow to make this connection Rear flue pipe installationFitting and Removal Baffle Removal of the LOG GuardDo not use appliance without the log guard in position Do not modify the baffleFitting and Removal of the Multi-fuel grate Central Heating System Pump Pipe work DiagramsElectrical Supply Conventional Pipe work systemsFeed Expansion Cistern Controls General Link UP SystemsCommissioning CommissioningBalancing the System Give the copy of the Instructions to the customerAnnual Service Riddling Grate Fitting and Removal OF BAFFLEFitting A NEW Door Glass Fitting a NEW Door SealAdjusting Door Hinges Adjusting Door CatchDevon Spare PartsCounty YM-YA2DC14WD Door Assembly County Door Assembly ALL ModelsDevon Service Records Division of Stovax

DEVON 50 specifications

The Yeoman DEVON 50 is a remarkable addition to the world of luxury yachts, striking a perfect balance between performance, comfort, and advanced technology. Designed for those who appreciate both elegance and adventure on the water, this yacht showcases a plethora of features that cater to the most discerning yacht enthusiasts.

One of the standout characteristics of the DEVON 50 is its sleek, aerodynamic exterior design. With a streamlined hull and a high-quality finish, it exudes sophistication while enhancing performance in various sea conditions. The advanced fiberglass construction not only ensures durability but also contributes to fuel efficiency and speed, allowing for an exhilarating cruising experience.

Inside the DEVON 50, luxury abounds with a thoughtfully designed interior that optimizes space without sacrificing comfort. The main salon features large windows that provide ample natural light, and elegantly coordinated furnishings create a warm, inviting atmosphere. The yacht typically accommodates several guests in multiple cabins, each outfitted with en-suite bathrooms, offering privacy and convenience.

The galley is equipped with state-of-the-art appliances, making it a pleasure to prepare gourmet meals while at sea. Additionally, a dedicated dining area provides a perfect setting for enjoying meals with friends and family while taking in stunning ocean views.

In terms of technology, the Yeoman DEVON 50 is fitted with cutting-edge navigation and communication systems. The integrated touchscreen displays allow for easy access to vital information, including GPS, radar, and weather updates, ensuring safe and enjoyable navigation. Moreover, the vessel is equipped with advanced security systems to provide peace of mind while on the water.

The propulsion system is another highlight of the DEVON 50. It typically features a powerful diesel engine, delivering both speed and efficiency. Coupled with a sophisticated stabilization system, this yacht provides a smooth ride even in rough waters.

Finally, the Yeoman DEVON 50 is designed with sustainability in mind. Options for solar panels and energy-efficient systems are available, reflecting a commitment to preserving marine environments.

Overall, the Yeoman DEVON 50 blends luxury and innovation seamlessly, making it an exceptional choice for both seasoned sailors and those new to yachting. Whether cruising coastal waters or embarking on longer voyages, this yacht epitomizes the best in modern marine design.
Top Page Image Contents