Gigabyte Guide to F_PANEL and Front Panel Connectors on Motherboards

English

11)F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.

Message LED/		Speaker Connector
Power/	Power
Sleep LED	Switch

MSG+ MSG- PW+ PW-	SPEAK+	SPEAK-
2		20
1		19
HD+ HD- RES- RES+ NC

Reset Switch

IDE Hard Disk Active LED

MSG (Message LED/Power/Sleep LED)	Pin 1: LED anode(+)
(Yellow)	Pin 2: LED cathode(-)
PW (Power Switch)	Open: Normal
(Red)	Close: Power On/Off
SPEAK (Speaker Connector)	Pin 1: Power
(Amber)	Pin 2- Pin 3: NC
	Pin 4: Data(-)
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
(Blue)	Pin 2: LED cathode(-)
RES (Reset Switch)	Open: Normal
(Green)	Close: Reset Hardware System
NC ( Purple)	NC

GA-M57SLI-S4 Motherboard - 26 -