English
Standard CMOS Features |
|
|
| ||||
|
|
|
| ||||
|
| CMOS Setup |
| ||||
|
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) |
| Mon, Jun 26 2006 | Item Help | |||
| Time (hh:mm:ss) |
| 22:31:24 |
| Menu Level | ||
| IDE Channel 0 Master |
| [None] |
| Change the day, month, | ||
| IDE Channel 0 Slave |
| [None] |
| year |
| |
| IDE Channel 2 Master |
| [None] |
|
|
| |
| IDE Channel 3 Master |
| [None] |
| <Week> |
| |
| IDE Channel 4 Master |
| [None] |
| Sun. to Sat. | ||
| IDE Channel 5 Master |
| [None] |
|
|
| |
| IDE Channel 6 Master |
| [None] |
| <Month> | ||
| IDE Channel 7 Master |
| [None] |
| Jan. to Dec. | ||
| Drive A |
|
| [1.44M, 3.5"] | <Day> |
| |
| Drive B |
|
| [None] |
| 1 to 31 (or maximum | |
| Floppy 3 Mode Support |
| [Disabled] |
| allowed in the month) | ||
| Halt On |
|
| [All, But Keyboard] | <Year> |
| |
| Base Memory |
|
| 640K |
| 1999 to 2098 | |
|
|
|
|
|
| ||
| Extended Memory |
| 511M |
|
|
| |
| : Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values |
| F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
|
| |||
| Week |
| The week, from Sun to Sat, determined by the BIOS and is display only | ||||
| Month |
| The month, Jan. Through Dec. |
|
| ||
| Day |
| The day, from 1 to 31 (or the maximum allowed in the month) | ||||
| Year |
| The year, from 1999 through 2098 |
|
| ||
Time
The times format in <hour> <minute> <second>. The time is calculated based on the
IDE Channel 0 Master/Slave
IDE HDD
IDE Channel 0 Master/Slave | devices setup. You can use one of three methods: | |
Auto | Allows BIOS to automatically detect IDE devices during POST. (Default value) | |
None | Select this if no IDE devices are used and the system will skip the automatic | |
| detection step and allow for faster system start up. | |
Manual | User can manually input the correct settings. | |
Access Mode | Use this to set the access mode for the hard drive. The four options are: | |
| CHS/LBA/Large/Auto(default:Auto) | |
IDE Channel 2/3/4/5/6/7 Master
IDE HDD 
Extended IDE Drive You can use one of the two methods:
Auto | Allows BIOS to automatically detect SATA IDE devices during POST(default) |
None | Select this if no SATA IDE devices are used and the system will skip the |
| automatic detection step and allow for faster system start up. |
- 34 - |
