Bucket Level Light, Auto Shut Off, Auto Defrost

10. Display Screen

The display screen shows a number of different indications depending on the selection function.

∙Shows the set % relative humidity level from 35%RH to 85%RH.

∙Shows auto start/stop time (0~24 hours).

∙After the option settings are completed, the display shows the approximate room humidity level in a range of 30%RH (Relative Humidity) to 90%RH

The display screen may also display the following alerts: Error Codes and Protection Codes:

AS- Humidity sensor error: Power off the unit, then unplug it for 15 minutes. Plug in and power on. If error repeats, call for service.

ES- Temperature sensor error: Power off the unit, then unplug it for 15 minutes. Plug in and power on. If error repeats, call for service.

P1- Unit is defrosting: Allow the unit time to defrost. The error will clear after the unit is self-defrosted.

P2- Bucket is full or bucket is not in right position: Empty the water bucket and reinstall it properly.

E1- Unit Error: Power off the unit, then unplug it for 15 minutes. Plug in and power on. If error repeats, call for service.

Unit Features and Alerts

Bucket Level Light

Bucket level indicator light will illuminate when the bucket is full and needs to be emptied. This light will also illuminate when the bucket is removed or not properly inserted. The dehumidifier shuts off within 30 seconds of the indicator light illuminating.

Auto Shut Off

When the selected humidity level is reached, the dehumidifying function will shut off automatically and the fan will run continuously.

Auto Defrost

In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost is evaporated.

Three Minute Cycle Down Function

After the unit has stopped, it cannot be restarted for 3 minutes. This is to ensure the unit completes its cycles down before reactivation.

Auto-Restart

In the event of a power outage, unit restarts at the previously set function mode and settings when power is restored.

Setting the Timer (Auto-start/stop)

Setting Auto Stop timer

With the unit is operating in any function mode, press the TIMER button. The TIME OFF light will

come on. Then set the desired time delay OFF hours by pressing the and buttons. The time increments are at 0.5 hour to up to 10 hours, then at 1 hour to 24 hours. When the delay time set has elapsed, the unit switches off. To cancel the delayed switch off function, turn off the unit.

Setting Auto Start timer

With the unit is turned off, press the TIMER button. The TIME ON light will come on. Then set the

desired time delay OFF hours by pressing the and buttons. The time increments are at 0.5 hour to up to 10 hours, then at 1 hour to 24 hours. When the delay time set has elapsed, the unit switches on. To cancel the delayed switch off function, turn off the unit.

When the Auto start & Auto stop times are set within the same program sequence, TIME ON and TIME OFF indicator lights illuminate identifying both ON and OFF times are programmed.

When the display shows P2, the Auto Stop/ Start function is canceled.

Silver Ion Air Filter

Your Whynter dehumidifier is equipped with an advanced Silver Ion air filter which is designed to not only trap dust and large particles but also kills bacteria in the air and controls the growth of microbes, such as virus, fungi and spores.

7 P a g e

RPD-651W, RPD-401W specifications

The Whynter RPD-401W and RPD-651W portable air coolers exemplify innovative design and advanced technology, making them ideal choices for climate control in various spaces. Both models are engineered for efficiency and convenience, catering to diverse cooling needs while maintaining portability.

The Whynter RPD-401W features a compact design, making it suitable for smaller spaces. It boasts a cooling capacity of 4000 BTUs, ensuring efficient temperature regulation for rooms up to 400 square feet. Its powerful yet energy-efficient fan operates quietly, providing a comfortable atmosphere without disturbing your daily activities. One of its standout features is the dual hose system, which enhances its cooling performance by drawing in fresh air from outside while expelling warm air, resulting in quicker temperature adjustments.

In contrast, the Whynter RPD-651W takes efficiency a notch higher with a cooling capacity of 6500 BTUs, making it effective for larger areas, accommodating spaces up to 600 square feet. Its design incorporates similar dual hose technology, allowing for improved air circulation and minimized energy consumption. This model is equipped with an adjustable thermostat and multiple fan speeds, empowering users to customize their cooling experience according to their preferences.

Both units come with robust safety features, including an automatic shut-off timer and a built-in safety fuse. This ensures that users can leave the unit running without worry, making it an excellent choice for overnight use or prolonged periods away from home.

Additionally, both the RPD-401W and RPD-651W come with easy-to-use remote controls, allowing users to adjust settings from a distance. The washable and reusable air filters further simplify maintenance, promoting a healthy indoor environment.

The sleek and modern aesthetic of both models ensures they blend seamlessly into any décor, whether at home, in the office, or during outdoor gatherings. With their combination of energy efficiency, user-friendly features, and powerful cooling capabilities, the Whynter RPD-401W and RPD-651W portable air coolers provide convenient solutions for maintaining comfort in any setting. Whether you need a solution for a small room or a larger space, these units deliver reliable performance and convenience.