Whynter ARC-131GD instruction manual Window kit Installation

Page 9

Window kit Installation

When you use this air conditioner unit, hot air must be exhausted out of the room to complete the air exchange of the condenser. When the unit is operating in dehumidifying and fan-only mode, no exhaust is required.

Your window kit has been designed to fit most standard vertical and horizontal windows. However, it may be necessary for you to modify the installation procedures for your window.

NOTE: If your window opening is less than the mentioned minimum length of the window slider kit, cut the slide bar with hole to fit window opening. Never cut out the hole on the window slide bar.

NOTE: When using the window kit on a window or sliding door it will cause the window or sliding door not to be properly closed and locked. Additional security measurements may be needed.

1.Open window approximately 5”.

2.Adjust the length of the window bars to the same length and width of the opening of the window. Cut the window piece if necessary to fit the length of your window.

3.Insert the fixtures through the back grooved side of

the window slide bar with holes. Line up the 4 holes and tighten the fixtures with 4 screws from the front. Fig 1.

4.Close the window on the window slide bars. For long term installation, you may screw the window kit into your window frame.

5.Move the unit to the window, extend the hoses and attach the other end of the hoses to the window slide bar.

6.Align the slots on the hose connectors to the tabs on the fixtures and snap the hoses to the window slide bar.

Figure 1

9 P a g e

Image 9
Contents CMODEL# ARC-131GD Whynter 13,000 BTU Dual Hose Portable AIR ConditionerTable of Contents Disposal Safety Precautions Operating Condition Mode Room TemperatureImage Accessory Name Quantity Identification of AccessoriesRear Identification of PartsLocation Installation InstructionsWindow kit Installation AIR Filters Installation Operation Instructions Remote Control PanelLED Lamps ON/OFF Switch Front Panel Switching ON/OFF the AIR Conditioner∙ Before Using Your Portable AIR Conditioner Cooling ModeFAN only Mode Dehumidifying ModeAutomatic Mode Timer Delayed Switch on / OFF FunctionSetting Delayed Switch on Timer Setting Switch OFF TimerAuto Restart Noise LevelCleaning the PRE-FILTER Care and MaintenanceCleaning the AIR Conditioner END of Season StorageARC-131GD Technical DataProblem Possible Causes Solutions TroubleshootingA g e ONE Year Limited Warranty Three Year Warranty on Compressor

ARC-131GD specifications

The Whynter ARC-131GD is a versatile and powerful portable air conditioner designed to provide effective cooling solutions in various indoor environments. With its compact design and robust performance, it is suitable for rooms up to 400 square feet, making it an ideal choice for homes, offices, and other spaces requiring efficient temperature control.

One of the standout features of the ARC-131GD is its dual hose system. Unlike single-hose models that can create negative pressure, this unit utilizes two distinct hoses: one for intake and one for exhaust. This design allows for faster and more efficient cooling by drawing in air from outside to cool the condenser and expelling warm air, resulting in a significant reduction in cooling times and improved energy efficiency.

Equipped with advanced cooling technology, the Whynter ARC-131GD operates with an impressive cooling capacity of 13,000 BTU. This means it can effectively lower the temperature in a medium-sized room even in sweltering conditions. Additionally, the unit operates quietly, making it perfect for use in bedrooms, study areas, or any other space where noise levels need to be kept low.

The dehumidifying feature is another highlight of this portable air conditioner, capable of removing up to 78 pints of moisture from the air in a day. This helps create a more comfortable environment by reducing humidity levels, which is particularly beneficial during summer months. The ARC-131GD offers an auto-drain function that allows the condensate collected during the cooling process to be reused for cooling, minimizing the need for manual water removal.

User convenience is emphasized in the design of this air conditioner. It comes with a remote control, allowing users to adjust settings such as temperature, mode, and fan speed from a distance. Additionally, the digital display and programmable timer enhance usability, providing further control over your indoor climate.

Energy efficiency is another key aspect of the Whynter ARC-131GD, as it is Energy Star rated. This certification indicates that the unit meets strict energy efficiency guidelines, helping users save on electricity bills while using the product.

Overall, the Whynter ARC-131GD is an excellent portable air conditioning solution, combining advanced technology, user-friendly features, and energy efficiency to ensure comfort in any setting. Its reliable performance and innovative design make it a popular choice for individuals seeking effective cooling solutions.