Pull Down Rope
Tools: Power drill, 1/8” Drill bit, Tape measure
WARNING
Do not install pull down rope on doors with operators. Children may become entangled in the rope causing severe or fatal injury.
Measure and mark the jamb approximately 48” to 50” (1220 to 1270 mm) from floor on the right or left side of jamb. Drill 1/8” pilot hole for no. 6 screw eye. Tie the pull down rope to the no. 6 screw eye and to the bottom corner bracket, as shown.
No. 6 Screw eye
Pull down rope
48” to 50” From floor
Pull down rope
Bottom corner bracket
15
Please Do Not Return This Product To The Store. Contact your local
refer to your local yellow pages business listings or go to the Find a Dealer section online at