Wayne-Dalton 8300, 8500 installation instructions Track Type Space Needed

2-1/2” (64 mm) of additional headroom is required.

Backroom requirement: Backroom is defined as the distance needed from the opening back into the garage to allow the door to open fully.

Backroom Requirements

DOOR HEIGHT	TRACK	MANUAL LIFT	MOTOR OPERATED
8’3” to 9’0”	12”,15” Radius	126” (3200 mm)	168” (4267 mm)
9’3” to 10’0”	12”,15” Radius	138” (3505 mm)	168” (4267 mm)
10’3” to 12’0”	12”,15” Radius	162” (4115 mm)	N/A
Headroom Requirements
TRACK TYPE		SPACE NEEDED
15” Radius track		14-1/2” (368 mm)
12” Radius track		12-1/2” (318 mm)

Suitable mounting surface		Headroom
2”x 6” lumber minimum
Header board 2”x 6”
lumber preferred				Backroom
		header	Nail
	Level
	seal	Door
eather		Height
W
Plumb
jambs	width
	Door			Weather
			Jamb	Seal
			Q.I. track
Jambs				Weather
			Jamb	Seal
			F.A. track	1/8” to 1/4”

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.wayne-dalton.com