Chauvet SCAN LED 300 Master/Slave Mode Sound-Active, Auto Mode, DMX Operation, Automatic-Slow

Page 10

Operation

DMX Operation

This is the operating mode which will allow for control with an external DMX controller. You must set the starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.

1.Press <MODE/ESC> until d*** appears on the LED screen.

2.Using <UP> and <DOWN>, select the starting address (001~512).

3.Press < ENTER > until one of the DMX personalities appears on the LED screen (8-

CH, 11-CH).

4.Using <UP> and <DOWN>, select the desired DMX personality.

5.Press <ENTER>.

Only connect 32 fixtures to a single DMX daisy chain!

Master/Slave Mode (Sound-Active, Auto Mode)

This mode allows a single unit, the master, to operate in one of the standalone modes, while one or more fixtures, slaves, synchronize their responses to the master.

Master:

The master fixture may be set in any of the STANDALONE modes: sound-active, fast, or

slow.

Slave:

1.Press <MENU> until SLAu appears on the LED screen.

2.Press < ENTER >.

Only connect 31 slave fixtures when operating in this mode!

Automatic-Slow

This fixture has a preprogrammed chase that will operate in a preprogrammed, slow playback speed.

Access this mode via the control panel on the front of the fixture. Please see the instructions below for further explanation.

1.Press <MODE/ESC> until one of the standalone modes appears on the LED screen

(SLAv, NStS, NAFA, NASL).

2.Using <UP> and <DOWN>, select NASL.

3.Press <ENTER>.

Automatic-Fast

This fixture has a preprogrammed chase that will operate in a preprogrammed, fast playback speed.

Access this mode via the control panel on the front of the fixture. Please see the instructions below for further explanation.

1.Press <MODE/ESC> until one of the standalone modes appears on the LED screen

(SLAv, NStS, NAFA, NASL).

2.Using <UP> and <DOWN>, select NAFA.

3.Press <ENTER>.

4. Operating Instructions

10

10/25/2010 10:23 AM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Table of Contents Unpacking Instructions What is includedBefore YOU Begin Manual ConventionsSafety Instructions Introduction Product Overview AC Power SetupPower Linking Mounting Operating Instructions Using the Control PanelConfiguring the Starting Address Menu MapDMX Operation Master/Slave Mode Sound-Active, Auto ModeOperation Automatic-SlowSound-Active Service ModeHidden Menu Map CH Mode DMX Channel Values000 Ù Stop General Troubleshooting AppendixData Cabling DMX PrimerFixture Linking Daisy Chain DMX Data CableCable Connectors Setting the Starting AddressPin to 5-Pin Conversion Chart Setting up a DMX Daisy ChainReturns Procedure General MaintenanceClaims Technical Specifications PowerContact US World Wide

SCAN LED 300 specifications

The Chauvet SCAN LED 300 is a cutting-edge mirror scanner designed to elevate the performance capabilities of lighting professionals and event designers. Combining advanced LED technology with versatile features, this lighting fixture is ideal for clubs, concerts, and various live events.

One of the standout features of the SCAN LED 300 is its powerful LED source. Capable of producing bright and vivid colors, the fixture utilizes high-efficiency LEDs that ensure longevity and low power consumption. This not only results in a lower carbon footprint but also reduces the costs associated with frequent bulb replacements common in traditional lighting systems.

In terms of performance, the SCAN LED 300 offers a wide array of color options and effects. With a comprehensive color wheel featuring multiple hues, operators can depict dynamic visuals that captivate audiences. The built-in effects and gobo patterns further enhance its capabilities, allowing for customizations that fit the specific ambiance of any venue.

Control is seamless with various operation modes available on the SCAN LED 300. It can be operated in standalone mode or controlled via DMX, granting users versatility in programming and automation. For ease of use, the fixture features a digital display for quick access to settings and menu scrolls, making adjustments straightforward on the fly.

Adding to its user-friendly attributes, the Chauvet SCAN LED 300 is designed with a lightweight and compact structure, making it easily transportable for touring professionals. Its rugged construction is also built to withstand the rigors of frequent travel while ensuring long-term reliability.

The fixture’s pan and tilt movement ensures expansive coverage, providing the ability to create sweeping light patterns across large areas. With its 180-degree pan and 90-degree tilt capabilities, the SCAN LED 300 can be used to produce impactful light shows that resonate well with audiences.

In summary, the Chauvet SCAN LED 300 is an exceptional lighting fixture that integrates advanced technologies with practical features. Its efficient LED source, operational versatility, and robust design make it a preferred choice for lighting professionals looking to push the boundaries of creativity in their productions. Whether for intimate gatherings or grand performances, the SCAN LED 300 stands out as an essential tool in modern event lighting.
Top Page Image Contents