Data Capture
for Workforce
in Motion
How to use with RoadRunners
Enable batch mode
When this mode is set, all the scanners (supporting the functionality) working with the dongle are in batch mode: all scanned data is stored in the flash memory.
The stored barcodes can be discharged by scanning the following barcode:
Upload batch data
(only for RoadRunners)
How to use with Pencil2 & RoadRunners Evolution & DualRunners
Enable batch mode
When this mode is set, all the scanners (supporting the functionality) working with the dongle are in batch mode: all scanned data is stored in the flash memory.
The stored barcodes or TagID can be discharged by scanning the following barcode:
Upload batch data
(only for Pencil2, RoadRunners Evolution, DualRunners)
Baracoda RS232 dongle Plug & Scan – User Guide v3.28.2 | - 8 - |