AMX VSS2 instruction manual Front Panel, Rear Panel

Product Information

Product Information

The AMX VSS2 Video Sync Sensor (Figure 1) is equipped with two independent channels to detect video sync signals. The channels generate a logic-level output when a horizontal sync signal is detected.

You can use the VSS2 for systems that require true power status for a VCR, tuner, or satellite receiver. The VSS2 monitors the video output of each source and sends a logic signal to a AMX input port in the AXCESS Central Controller. You can also use the logic signal output to control AMX closure-driven peripherals such as a PC1 Power Controller. Since most video source equipment generates blue screen video output when they are on, the VSS2 can sense true on and off status.

Front Panel

FIG. 1 illustrates the front panel of the VSS2.

Power LED

FIG. 1 Front Panel

Rear Panel

FIG. 2 illustrates the rear panel of the VSS2.

Video 1 and 2 connectors

FIG. 2 Rear Panel

Sense 2 LED

Sense 1 LED

12 VDC power supply connector

Sense Out (output) connector

VSS2 Video Sync Sensor 1