Specifications

Product Information

The table below lists the specifications for the VSS2 Video Synch Sensor.

Power Supply	12 VDC at 20 mA

Power Consumption	2.4 W maximum

Sensitivity	• Video - 800 mV (typical), 5V (max)
	• Sync - 15.75 kHz
	• Sensing - 1 kHz to 3 MHz (200 mV rms minimum), 3 MHz to 20 MHz (600 mV
	rms minimum), and 20 MHz to 75 MHz (750 mV rms minimum)
	• RGB Sensing - Sync on Green, Horizontal Sync
	• Output - Open collector with internal pull-up to 5 volts and solid-state logic
	low when sync is present.

Front Panel	• Power - Green LED indicator
	• Sense 1 - Red LED lights when signal is within sensing range
	• Sense 2 - Red LED lights when signal is within sensing range

Rear Panel	• Video 1 - RCA jacks for OUT and IN
	• Video 2 - RCA jacks for OUT and IN
	• Sense Out 1 and 2 - 4-pin Phoenix connector
	• 12 VDC-2-pin Phoenix connector
	• Delay - None (input connected directly to output)

Enclosure	Metal with black matte finish

Dimensions (HWD)	1.5" x 5.09" x 5.27" (3.81 cm x 12.93 cm x 13.39 cm)

Weight	6.70 oz (189.94 g)

Included Accessories	• One 4-pin cable connector
	• One 2-pin power connector

Optional Accessories	• 12 VDC power supply, 20 mA minimum
	• AC-RK Accessory Rack Kit

VSS2 Video Sync Sensor	3