Quick Set Up, Installation Instructions

Figure 1

Quick Set Up

Remove the three enclosed AA

batteries and install them into the battery well. Carefully place the red battery warning flags into the battery well. Observe the battery polarity markings at the bottom of the battery well.

When the batteries are first

installed, the unit will beep once and the red alarm light will flash. After approximately 20-30 seconds the green light will flash indicating that the unit is operational. Replace battery cover. Your Kidde CO alarm is now operational.

Installation Location

When choosing your installation locations, make sure you can hear the alarm from all sleeping areas. If you install only one carbon monoxide alarm in your home, install the alarm near bedrooms, not in the basement or furnace room.

Recommended Locations - Upper Levels of Home

Installation Instructions

Mounting

1. Using the template provided (see page 18). Mark the location on wall.

2.Insert the two screws provided until the screw heads are approximately

1/8” from wall. (If mounting in plaster board or drywall, drill 3/16” hole and use the plastic anchors provided.)

3.Hook the Kidde CO Alarm unit over the screws onto keyholes in back of unit.

Seven (7) years after initial power up, this unit will "chirp" every 30 seconds to indicate that it is time to replace the alarm. After seven years the device may no longer detect car- bon monoxide accurately and should be replaced immediately. To help identify the date to replace the unit, a label has been affixed to the side of the alarm. Write the "Replace by" date (7 years from power up) in permanent marker on the label.

•If you have only one alarm,place it near sleeping areas,not near fuel burning appli- ances,such as fire- places,furnaces or hot water heaters.

DINING KITCHEN BEDROOM BEDROOM

LIVING ROOM

BEDROOM

Where To Install Your Kidde CO Alarm

The following suggestions are intended to help you with the placement and installation of your Kidde CO alarm.

•	Place out of the reach of children. Under no circumstance
	should children be allowed to handle the CO alarm.
•	Install in a bedroom or hallway located close to the
	sleeping area. Take special care to verify the alarm can

- Basement Levels of Home

FURNACE

ROOM

	be heard in sleeping areas.
•	It is recommended that a CO alarm be installed on each
	level of a multilevel home.
• Locate at least 5 feet away from all fuel burning appliances.
•	Placing at eye level allows for optimum monitoring of
	the red and green indicator lights.

KN-OOB-B specifications

The Kidde KN-OOB-B is a leading-edge carbon monoxide (CO) alarm designed to provide safety and peace of mind for households. This essential device is engineered to detect the presence of carbon monoxide—a colorless, odorless gas that can be fatal in high concentrations. The KN-OOB-B features advanced sensor technology and an array of characteristics that position it as a top choice for CO detection.

One of the main features of the Kidde KN-OOB-B is its digital display, which not only shows CO levels in parts per million (ppm) but also provides critical information on battery status and alerts. This user-friendly feature allows homeowners to monitor the CO levels in real-time, making it easier to respond to potential dangers promptly. Additionally, the unit is equipped with a peak level memory function that records the highest levels of CO detected, helping users track exposure and maintain safety.

The Kidde KN-OOB-B employs microprocessor technology, which enhances its detection capabilities. This technology ensures precise monitoring and reduces the likelihood of false alarms, a common concern with CO detectors. The alarm is designed to activate at or above 70 ppm, providing an audible alert when CO levels become dangerous. Furthermore, the unit is equipped with a test/reset button, allowing users to easily check its functionality or silence the alarm in case of non-threatening conditions.

Another noteworthy characteristic of the Kidde KN-OOB-B is its battery operation. This model uses a 9V battery, which provides the advantage of continued operation during power outages. The low battery warning feature ensures that users are alerted when the battery needs replacement, further enhancing the reliability of this vital safety device.

Installation and maintenance of the Kidde KN-OOB-B are straightforward. The compact design allows for flexible placement in various locations within the home, ensuring optimal performance. Regular maintenance is minimized as the unit is equipped with a sealed battery compartment that eliminates the hassle of battery replacement in the typical lifespan of the alarm.

Overall, the Kidde KN-OOB-B is a robust and reliable carbon monoxide alarm that combines advanced technology with user-friendly features. Its ability to detect CO accurately, alongside its digital display and peak level memory, makes it a worthy investment for any household concerned about safety from carbon monoxide exposure.