Installing and removing previously installed decorator panels.

Removing the Handles

In order to remove the decorator panels and replace with new panels you need to remove the handles. A T-20 Torx driver is needed.

 

Loosen and remove the 2 screws in the Top Trim.

1

 

Loosen and remove the 2 screws in the bracket that attaches the Handle to the top of the Door.

2

 

Grip the Handle firmly and slide upwards. The keyhole slots on the Handle slide off the buttons on

3

 

the door.

 

Open the door and slide out the decorator panels.

4

Top Trim Screws

Bracket Screws

Bracket

Buttons

Slots

Button

Slot

Inserting the Door Panels

Before installing the decorator panels, make sure they have been routed out in the proper areas as shown in the beginning of this section. Slide in the panels to perform a trial fit before fastening down the Handle and Top Trim.

Installing the Handles

Once the panels are fitted properly, install the Handle and Top Trim.

 

Slide the keyhole slots on the Handle down onto the buttons mounted to the face of the door. Slide the

1

 

Handle downward until the bracket at the top of the Handle fits flush on the top of the door.

 

 

Replace the two screws in the bracket that attach the Handle to the top of the Door and tighten the

 

2

 

 

screws to 45 in-lbs torque.

 

 

Replace the Top Trim making sure it fits over the Side Trim and that the locating tabs fit the inside of

 

3

 

 

the Handle profile.

 

 

Replace the Top Trim screws and tighten to 30 in-lbs torque.

25

4

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips

Customer Service

Page 24 Page 26
Page 25
Image 25
GE 162D9617P005 owner manual Removing the Handles, Inserting the Door Panels, Installing the Handles
Page 24 Page 26

162D9617P005 specifications

The GE 162D9617P005 is a notable product from General Electric that has garnered attention for its reliability, efficiency, and advanced features. As a component typically found in various industrial applications, it plays a crucial role in enhancing operational performance across different sectors.

One of the key features of the GE 162D9617P005 is its robust design, engineered to withstand harsh working conditions. This durability is a significant advantage for industries that operate in challenging environments, such as oil and gas, manufacturing, and energy production. The materials used in its construction are resistant to wear and corrosion, which extends the life of the component and reduces the need for frequent replacements.

In terms of technology, the 162D9617P005 integrates advanced monitoring capabilities. This allows for real-time data collection and analysis, enabling operators to track performance metrics and identify potential issues before they escalate into significant problems. Such predictive maintenance capabilities enhance overall efficiency and minimize downtime, a critical factor in maintaining productivity.

Another important characteristic of the GE 162D9617P005 is its compatibility with various systems and equipment. This versatility makes it an attractive choice for companies looking to upgrade or integrate new technology without the need for extensive modifications to existing setups. This feature is particularly beneficial for organizations aiming to modernize their operations while keeping costs manageable.

The ease of installation and maintenance is another highlight of the GE 162D9617P005. Designed with user-friendliness in mind, technicians can install and service the component with minimal effort, allowing for quicker turnaround times. This is especially important in industries where time is money, and efficiency can significantly impact the bottom line.

Energy efficiency is a growing concern across all sectors, and the GE 162D9617P005 addresses this need by operating at optimized performance levels that help reduce energy consumption. This aligns with global efforts to promote sustainability and lower operational costs, making it an appealing solution for environmentally-conscious businesses.

In conclusion, the GE 162D9617P005 represents a blend of durability, advanced technology, and operational efficiency. Its features make it a valuable asset in various industrial applications, enhancing productivity while supporting the drive toward modernization and sustainability. For organizations looking to improve their operational infrastructure, this component stands out as a reliable and efficient choice.
Top Page Image Contents