Insert the end of the copper tubing into the water valve connection as far as possible. While holding the tubing, tighten the fitting.
Remove the plastic flexible cap from the water valve.

Installing the water line.

Connect the Tubing to the Refrigerator

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1

2 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

One of the illustrations below will look like the connection on your refrigerator.

Compression Nut

 

Tubing Clamp

Ferrule (sleeve) 1/4

 

 

Refrigerator

 

 

 

Connection

 

 

 

 

 

 

1/4Copper

 

 

 

 

 

 

Tubing

3

4 Fasten the copper tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

1/4Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

1/4Copper Tubing

TroubleshootingTips Installation Instructions OperatingInstructions SafetyInstructions

CustomerService

Turn the Water On at the Shutoff Valve

Tighten any connections that leak.

Plug In the Refrigerator

Arrange the coil of copper tubing so that it does not Push the refrigerator back to the wall. vibrate against the back of the refrigerator or against

the wall.

Start the Icemaker

Set the icemaker feeler arm to the ON (down)

NOTE: The icemaker may double-cycle when it first starts,

position. The icemaker will not begin to operate

causing some water spillage from the icemaker into the

until it reaches its operating temperature of 15°F.

ice bucket. This is normal and should not happen again.

(-9°C.) or below. It will then begin operation

 

automatically if the icemaker feeler arm is in the

 

ON (down) position.

 

28

Page 28
Image 28
GE 162D9617P005 Connect the Tubing to the Refrigerator, Turn the Water On at the Shutoff Valve, Plug In the Refrigerator

162D9617P005 specifications

The GE 162D9617P005 is a notable product from General Electric that has garnered attention for its reliability, efficiency, and advanced features. As a component typically found in various industrial applications, it plays a crucial role in enhancing operational performance across different sectors.

One of the key features of the GE 162D9617P005 is its robust design, engineered to withstand harsh working conditions. This durability is a significant advantage for industries that operate in challenging environments, such as oil and gas, manufacturing, and energy production. The materials used in its construction are resistant to wear and corrosion, which extends the life of the component and reduces the need for frequent replacements.

In terms of technology, the 162D9617P005 integrates advanced monitoring capabilities. This allows for real-time data collection and analysis, enabling operators to track performance metrics and identify potential issues before they escalate into significant problems. Such predictive maintenance capabilities enhance overall efficiency and minimize downtime, a critical factor in maintaining productivity.

Another important characteristic of the GE 162D9617P005 is its compatibility with various systems and equipment. This versatility makes it an attractive choice for companies looking to upgrade or integrate new technology without the need for extensive modifications to existing setups. This feature is particularly beneficial for organizations aiming to modernize their operations while keeping costs manageable.

The ease of installation and maintenance is another highlight of the GE 162D9617P005. Designed with user-friendliness in mind, technicians can install and service the component with minimal effort, allowing for quicker turnaround times. This is especially important in industries where time is money, and efficiency can significantly impact the bottom line.

Energy efficiency is a growing concern across all sectors, and the GE 162D9617P005 addresses this need by operating at optimized performance levels that help reduce energy consumption. This aligns with global efforts to promote sustainability and lower operational costs, making it an appealing solution for environmentally-conscious businesses.

In conclusion, the GE 162D9617P005 represents a blend of durability, advanced technology, and operational efficiency. Its features make it a valuable asset in various industrial applications, enhancing productivity while supporting the drive toward modernization and sustainability. For organizations looking to improve their operational infrastructure, this component stands out as a reliable and efficient choice.