Battery Installation/Replacement

Installation/Replacement

Since batteries are not installed in the unit at the factory, you will need to install them.

Battery Installation/Replacement (cont.)

Battery Replacement/Installation Instructions

To install or replace the batteries in your Kidde unit please per- form the following steps:

Three AA batteries have been included with your purchase. When replacing the batteries, we recommend use of the following for a minimum of one year normal operation:

•Duracell MN1500

• Energizer E91

• Rayovac 815

These batteries can be purchased at your local retailer.

Note: Constant exposure to high or low humidity may reduce battery efficiency.

1.Gently flip open the lower half of the front cover to expose the battery compartment.

2.Remove the old batteries and properly dispose of them as recommended by the battery manufacturer (see figure 10).

TEST	MOVETO
RESET	FRESHAIR
Operate	Alarm
	CARBON MONOXIDE ALARM

Figure 10

3.Reinstall the new batteries, being careful to seat the red battery warning flags in the recess of the battery well. Also, note the polarity illustration in

the bottom of the battery compartment. If applicable, the

unit will chirp and display for approximately one minute and return to normal operation.

4.Gently close the bottom cover. The bottom cover of your CO alarm will NOT close if all three AA batteries are not properly installed.

KN-COPP-B, KN-COB-B specifications

The Kidde KN-COB-B and KN-COPP-B are advanced carbon monoxide (CO) and natural gas detectors designed to provide essential safety features for homes and workplaces. These devices are engineered to alert occupants of the presence of carbon monoxide or natural gas, which can pose serious health risks or even be life-threatening in high concentrations.

The KN-COB-B model is a sensitive CO detector that uses electrochemical sensor technology to accurately monitor levels of carbon monoxide in the environment. With a digital display, it provides real-time readings, allowing users to keep track of CO levels effectively. The detector features a peak level memory that recalls the highest CO level recorded since the last reset, which can be invaluable for pinpointing exposure at specific times. An alarm will trigger when dangerous levels of CO are detected, ensuring timely intervention and safety.

On the other hand, the KN-COPP-B model is designed to detect natural gas leaks, including methane and propane. It utilizes a state-of-the-art semiconductor sensor that provides reliable performance and swift response times. Like its counterpart, it features a robust alarm system, ensuring that occupants are alerted as soon as gas concentrations reach dangerous levels.

Both models are equipped with a test/reset button that allows users to easily check the functionality of the alarms, ensuring that they remain in working order at all times. They also come with an easy-to-read LED display that shows the status of the device, including the presence of CO or natural gas.

Design-wise, these detectors are sleek and compact, fitting seamlessly into any home or office environment. They can easily be mounted on walls or placed on flat surfaces, providing flexibility in placement options. Each model comes with an AC power adapter for continuous use, supplemented by a battery backup that ensures operation during power outages.

Together, the Kidde KN-COB-B and KN-COPP-B provide a comprehensive solution for monitoring both carbon monoxide and natural gas levels, making them essential safety devices for any modern living or working space. Their advanced technologies, user-friendly features, and high reliability make them a top choice for consumers seeking peace of mind regarding air quality and safety.