Kidde KN-COPP-B Quick Set Up, Installation Instructions, Your Kidde CO Alarm is now operational

Page 4

Quick Set Up

Remove the three enclosed AA batteries and install them into the battery well. Carefully place the red battery warning flags into the battery well. Observe the battery polarity markings at the bottom of the battery well. After approximately 30 seconds, your CO alarm will begin monitoring for CO.

Your Kidde CO Alarm is now operational.

Installation Instructions

Installation Location

When choosing your installation locations, make sure you can hear the alarm from all sleeping areas. If you install only one carbon monoxide alarm in your home, install the alarm near bedrooms, not in the basement or furnace room.

Recommended Locations

Upper Levels of Home

DINING KITCHEN BEDROOM BEDROOM

LIVING ROOM

BEDROOM

Basement Levels of Home

FURNACE

ROOM

If you have only one alarm, place it near sleeping areas.

Position near fuel burning appliances, near fireplaces, furnace or hot water heater.

6

7

Image 4
Contents Alarm Table of Contents Carbon Monoxide OverviewKidde Product View Installation Instructions Quick Set UpYour Kidde CO Alarm is now operational Where To Install Your Kidde CO Alarm Installation InstructionsWhere not To Install Your Kidde CO Alarm Features and Operation of Digital Display Model Digital Display Backlight FeatureDigital Display Shows CO level in PPM Other Possible Displays and Their MeaningsUnit Malfunction Red Alarm Light ResetGreen Operate Light Test the unitBattery Installation/Replacement Installation/ReplacementBattery Replacement/Installation Instructions Duracell MN1500 Energizer E91Part Four What to do When the Alarm Sounds What To Do If The Alarm Sounds Symptoms of CO PoisoningNever ignore the sound of the alarm Caring for your Kidde Battery Powered CO Alarm What To Do If The Alarm SoundsDo not place near a diaper pail Symptom Troubleshooting GuideAction Frequently Asked Questions Wall Mounting TemplateProduct Specifications Limited WarrantyFor Warranty Service Please send products and all other correspondence to

KN-COPP-B, KN-COB-B specifications

The Kidde KN-COB-B and KN-COPP-B are advanced carbon monoxide (CO) and natural gas detectors designed to provide essential safety features for homes and workplaces. These devices are engineered to alert occupants of the presence of carbon monoxide or natural gas, which can pose serious health risks or even be life-threatening in high concentrations.

The KN-COB-B model is a sensitive CO detector that uses electrochemical sensor technology to accurately monitor levels of carbon monoxide in the environment. With a digital display, it provides real-time readings, allowing users to keep track of CO levels effectively. The detector features a peak level memory that recalls the highest CO level recorded since the last reset, which can be invaluable for pinpointing exposure at specific times. An alarm will trigger when dangerous levels of CO are detected, ensuring timely intervention and safety.

On the other hand, the KN-COPP-B model is designed to detect natural gas leaks, including methane and propane. It utilizes a state-of-the-art semiconductor sensor that provides reliable performance and swift response times. Like its counterpart, it features a robust alarm system, ensuring that occupants are alerted as soon as gas concentrations reach dangerous levels.

Both models are equipped with a test/reset button that allows users to easily check the functionality of the alarms, ensuring that they remain in working order at all times. They also come with an easy-to-read LED display that shows the status of the device, including the presence of CO or natural gas.

Design-wise, these detectors are sleek and compact, fitting seamlessly into any home or office environment. They can easily be mounted on walls or placed on flat surfaces, providing flexibility in placement options. Each model comes with an AC power adapter for continuous use, supplemented by a battery backup that ensures operation during power outages.

Together, the Kidde KN-COB-B and KN-COPP-B provide a comprehensive solution for monitoring both carbon monoxide and natural gas levels, making them essential safety devices for any modern living or working space. Their advanced technologies, user-friendly features, and high reliability make them a top choice for consumers seeking peace of mind regarding air quality and safety.