High Levels, Mid Levels, Low Levels | Kidde kn-cop-ic, kn-cobic

1. Information About Carbon Monoxide

Carbon Monoxide PPM Levels

(model KN-COP-IC with digital display only)

Model KN-COP-IC is equipped with a digital display that shows levels of CO (displayed in PPM – parts per million). Learn the difference between dangerous, high, mid and low levels.

Dangerous Levels:

When someone is experiencing symptoms of CO poisoning and CO readings are generally above 100 PPM. Anytime someone is experiencing the symptoms of CO poisoning this should be treated as an emergency. See “What to do When the Alarm Sounds” (inside front cover).

High Levels:

Generally above 100 PPM, with no one experiencing symptoms. This should be treated as an urgent situation. See “What to do When the Alarm Sounds” (inside front cover).

Mid Levels:

Generally between 50 PPM to 100 PPM. This should be cause for concern and should not be ignored or dismissed. See “What to do When the Alarm Sounds” (inside front cover).

Low Levels:

Generally below 50 PPM. Kidde recommends you take action to eliminate the source of CO. See “What to do When the Alarm Sounds” (inside front cover).

IMPORTANT: Model KN-COB-IC does not have a digital display and does not display carbon monoxide levels in PPM. If the alarm sounds, it should be treated as a potentially serious condition. See “What to do When the Alarm Sounds” (inside front cover).

Possible Sources of Carbon Monoxide

Inside your home, appliances used for heating and cooking are the most likely sources of CO. Vehicles running in attached garages can also produce dangerous levels of CO.

CO can be produced when burning any fossil fuel, such as gasoline, propane, natural gas, oil and wood. It can be produced by any fuel- burning appliance that is malfunctioning, improperly installed, or not ventilated correctly, such as:

•Automobiles, furnaces, gas ranges/stoves, gas clothes dryers, water heaters, portable fuel burning space heaters and generators, fireplaces, wood-burning stoves and certain swimming pool heaters.

1.Information About Carbon Monoxide

•Blocked chimneys or flues, back drafts and changes in air pressure, corroded or disconnected vent pipes, loose or cracked furnace exchangers.

•Vehicles and other combustion engines running in an open or closed garage, attached or near a home.

•Burning charcoal or fuel in grills and hibachis in an enclosed area.

Conditions That Can Produce Carbon Monoxide

The following conditions can result in transient CO situations:

•Excessive spillage or reverse venting of fuel-burning appliances caused by outdoor ambient conditions, such as, wind direction and/or veloci- ty, including high gusts of wind, heavy air in the vent pipes (cold/humid air with extended periods between cycles).

•Negative pressure resulting from the use of exhaust fans.

•Simultaneous operation of several fuel-burning appliances competing for limited internal air.

•Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.

•Obstructions in, or unconventional, vent pipe designs which can amplify the above situations.

•Extended operation of unvented fuel-burning devices (range, oven, fireplace, etc.).

•Temperature inversions which can trap exhaust gases near the ground.

•Vehicle idling in an open or closed garage, or near a home.

To be safe, know the possible sources of CO in your home. Keep fuel- burning appliances and their chimneys and vents in good working condi- tion. Learn the early symptoms of exposure, and if you suspect CO poi- soning, move outside to fresh air and get emergency help. Your first line of defense is an annual inspection and regular maintenance of your appliances. Contact a licensed contractor or call your local utility compa- ny for assistance.

Information About Carbon Monoxide Alarms – What They Can and Cannot Do:

CO alarms provide early warning of the presence of CO, usually before a healthy adult would experience symptoms. This early warning is possible, however, only if your CO alarm is located, installed and maintained as described in this guide.

kn-cop-ic, kn-cobic specifications

The Kidde KN-COP-IC and KN-COB-IC are advanced carbon monoxide (CO) and explosive gas detectors designed to enhance home safety through state-of-the-art technology. These devices serve as a crucial line of defense against the dangers posed by carbon monoxide, a colorless, odorless gas that can lead to serious health risks or even fatality if undetected.

One of the main features of the Kidde KN-COP-IC is its electrochemical CO sensor, which provides accurate readings while also minimizing the chances of false alarms. This sensor technology allows the device to detect the presence of carbon monoxide at lower concentrations, making it effective in a variety of environments, including homes, garages, and other enclosed spaces. The KN-COB-IC model, focusing on explosive gases, utilizes a sophisticated catalytic bead sensor that can precisely identify the presence of combustible gases, such as natural gas and propane.

Both models are equipped with a digital display that provides real-time readings, making it easy for users to monitor CO levels and other hazardous gases present in their environment. The KN-COP-IC offers a peak level memory feature, which stores the highest levels of CO detected since the last reset. This helps users understand previous exposure levels, potentially informing safety and health decisions.

In terms of installation and usability, the Kidde detectors come with a battery backup to ensure continuous operation, even during power outages. They are designed for easy mounting, whether on walls or ceilings, and are compact enough to blend seamlessly into home decor. Furthermore, the integrated test/silence button allows users to check the functionality of the alarm and silence it during false alarms or maintenance checks.

Both the KN-COP-IC and KN-COB-IC models meet stringent safety standards and certifications, ensuring they provide reliable protection. Regular maintenance is simplified with clear instructions included in the user manual, along with the recommendation to replace the units after a specified period, usually around 7 years for CO detectors.

In conclusion, the Kidde KN-COP-IC and KN-COB-IC are essential tools in modern home safety. With their advanced sensor technology, user-friendly features, and reliable performance, these detectors not only safeguard families from carbon monoxide and explosive gases but also promote peace of mind in everyday living. By investing in these reliable detectors, homeowners can ensure the safety and well-being of their loved ones.