GAS LEAK DETECTOR INSTALLATION & USER GUIDE |
|
| CONTENTS |
1. INTRODUCTION | 3 |
2. EXTERNAL CONNECTIONS | 3 |
3. POWER SUPPLY | 4 |
4. ANALOGUE OUTPUTS | 4 |
5. RELAY CONTACTS | 5 |
6. GAS DETECTION RANGE | 5 |
7. STANDARD DEFAULT SETTINGS | 6 |
8. CONNECTIONS AT A GLANCE | 7 |
At the time of writing, this User Guide accurately describes the product. However, in the course of development of our products we may make changes without notification. Honeywell shall not be liable for errors or for incidental or consequential damages, directly or indirectly, in connection with the furnishing, performance or misuse of this product or document. All Installation and Commissioning work on Honeywell equipment should be carried out by suitably qualified personnel only. Normal safety precautions and good working practice should be observed, to prevent damage or injury at all times. We welcome comments about our products and documentation.
Contact us at :
Address on back cover of this guide
2 |