Macurco DVP-120 R o b e, O u b l e S i g n a l s Z z, O u b l e B u z z G n a l s T r i p l e

S t r o b e : 5 O F F

Figure 3-59 Strobe Warning Signal

This display example shows that the strobe will not signal a warning condition. The signal definitions are:

– 1 Continuous

–2 Intermittent, one second on at two second intervals

–3 Double Tap, two beeps at 5 second intervals

–4 Triple Tap, three short beeps at 15 second intervals

–5 Off, strobe will not flash (default)

3.3.8.9Trouble Signal Summary

The trouble signals are in response to one or more sensor faults, either as a defined current level, or because of wiring problems

T r o u b l e S i g n a l s

B u z z

Figure 3-60 Trouble Signals

This display example shows that troubles are signaled by the internal Buzzer only.

3.3.8.10 Trouble Buzzer Signal

T r o u b l e B u z z : 4

S i g n a l s T r i p l e

Figure 3-61 Buzzer Trouble Signal

This display example shows that the buzzer will signal a trouble condition with a triple tap signal. The signal definitions are:

– 1 Continuous

–2 Intermittent, one second on at two second intervals

–3 Double Tap, two beeps at 5 second intervals

–4 Triple Tap, three short beeps at 15 second intervals (default)

–5 Off, buzzer will not sound

3.3.8.11Trouble Horn Signal

T r o u b l e S i g n a l s

H o r n : 5 O F F

Figure 3-62 Horn Trouble Signal

This display example shows that the horn will not signal a trouble condition. The signal definitions are:

– 1 Continuous

–2 Intermittent, one second on at two second intervals

–3 Double Tap, two beeps at 5 second intervals

–4 Triple Tap, three short beeps at 15 second intervals

–5 Off, horn will not sound (default)

Revision 0.07 34