Ei Electronics Ei 261EN, Ei 261DEN manual B15404-R0-261EN-UC-ENG 31/5/07 201 PM

Page 12

B15404-R0-261EN-UC-ENG 31/5/07 2:01 PM Page 12

3.3 If locating the CO alarm in a room with a fuel burning appliance (see figure 2)

•If it is mounted on a wall, it should be located at a height greater than the height of any door or window but still be at least 150mm from the ceiling.

•If it is mounted on the ceiling it should be at least 300mm from any wall or light fitting.

•The CO alarm should be a horizontal distance of between 1m and 3m from the potential CO source.

•If there is a partition in the room, the CO alarm should be located on the same side of the partition as the potential source.

•In rooms with sloped ceilings, the CO alarm should be located at the high side of the room (see fig 3).

3.32If locating the CO alarm in a bedroom or in rooms remote from a fuel burning appliance (see figure 4)

• Mount the CO alarm relatively close to the breathing zone of the occupants.

Whatever position is chosen make sure it is possible to view the three light indicators, when in the vicinity of the alarm.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Digital Display Ei261DEN onlyContents Read this First What to do when the alarm sounds What is Carbon Monoxide ? Carbon Monoxide the Silent KillerSymptoms of Carbon Monoxide Poisoning High levels of CO in a house can be caused byInhalation Time approx and Symptoms Developed Table a Effects of Carbon Monoxide PoisoningWhat happens when your CO Alarm detects Carbon Monoxide ? Table B CO Alarm ResponseIf your CO Alarm sounds follow the instructions on Ppm Off 50ppmNever Ignore the Alarm CO Alarm MemoryEi261-DEN Only Where to Place CO Alarms Unsuitable Locations B15404-R0-261EN-UC-ENG 31/5/07 201 PM Location in room with a fuel burning appliance Location in rooms with sloped Installing Your Carbon Monoxide Alarms Installation Procedure Surface Wiring Interconnecting Ei Electronics Carbon Monoxide Alarms Interconnect Wiring Diagram CO Alarms and Smoke Alarms should not be InterconnectedTesting Your CO Alarm How to distinguish between CO Alarm and Smoke Alarm Warnings Maintaining Your CO Alarm How to disconnect and remove the alarmSensor Module Replacement Limitations of CO Alarms B15404-R0-261EN-UC-ENG 31/5/07 201 PM HOW to Protect Your Family Technical Specification Sensing CO B15404-R0-261EN-UC-ENG 31/5/07 201 PM Getting the CO Alarm Serviced Five Year GuaranteeTroubleshooting Alarm does not Work with the Test ButtonAlarm Beeps and Amber Light Flashes Every 40 Seconds Alarm Beeps Every 40 Seconds without amber light flashingTEST/HUSH Button does not Silence Alarms Ei Electronics

Ei 261DEN, Ei 261EN specifications

Ei Electronics is renowned for its innovation in the fire detection and alarm industry, and among its impressive product offerings, the Ei 261DEN and Ei 261EN smoke alarms stand out for their reliability and advanced features. Both models are designed to provide maximum safety and ease of use in residential and commercial settings.

The Ei 261DEN is equipped with a high-performance optical smoke sensor that detects a broad range of smoke particles, making it particularly effective at sensing smoldering fires. Its intelligent design allows it to differentiate between genuine fire situations and false alarms, such as from cooking smoke or steam. This capability reduces nuisance alarms, ensuring that users remain alert but not overly disturbed by non-threatening activations.

On the other hand, the Ei 261EN offers a similar level of performance with slight variations in features tailored to different environments. This model also utilizes a reliable optical smoke sensor but includes enhanced connectivity options for integration with other alarm systems. The Ei 261EN is particularly suited for larger homes or commercial spaces where multiple interconnected alarms can provide a comprehensive safety network.

One of the prominent characteristics of both models is their user-friendly interface. Each alarm is designed with an easy-to-use test button that allows users to check the functionality of the unit quickly. Additionally, these devices feature a low battery warning system that alerts users when it’s time to replace the battery, ensuring that the alarm remains operational at all times.

Another critical feature is the sealed battery technology found in these alarms. The Ei 261DEN and Ei 261EN come with long-lasting batteries that can power the alarm for up to ten years, eliminating the need for frequent battery changes. This design enhances user convenience and ensures uninterrupted protection.

In terms of build quality, both models are constructed to withstand harsh conditions, making them suitable for various installations. Their compact design and modern aesthetics ensure they can blend seamlessly into any environment without compromising on functionality.

In summary, the Ei Electronics Ei 261DEN and Ei 261EN smoke alarms embody advanced fire detection technology, user-centric design, and robust performance. Their features make them ideal for ensuring safety in both homes and workplaces, highlighting Ei Electronics' commitment to innovation and reliability in safety solutions.
Top Page Image Contents