Atwood Mobile Products KN-COPP-B manual Concentration shown may not be as Accurate as noted on

Page 12

Features and Operation for Digital Display Model (cont.)

Resetting the Peak Level Reading

 

To reset or clear the peak level reading, press

 

and hold the peak level button and then press

 

Figure 7

and hold the test/reset button at the same time.

 

The number on the display will return to 0 PPM.

 

CO concentrations displayed below 30 PPM in

 

memory are for reference only and the accuracy

Figure 8

of the concentration shown may not be as

 

accurate as noted on page 24.

 

Note: The peak level reading will also be reset when the batteries are removed.

12

12

 

 

 

.18)-17 page d’installation piles/Instructions

 

des remplacement (voir vide est piles des charge de l’indicateur

 

que remarquez - piles les changer faut il 8, figure la affiché voyez vous Si

 

 

 

pile de erreur ou pile Remplacer

 

 

 

.7 figure Voir .remplacé d’être besoin a système Le

 

 

 

capteur de fonctionnement Mauvais

 

 

 

.24 page la à indiqué comme

 

 

 

approximative, moins ou plus être peut indiquée centration

 

8 Figure

 

 

 

-con la de précision la et seulement indicatif titre à données

 

 

 

sont ppm 30 de dessous-en visualisées concentrations Les

 

 

 

.PPM 0 à retournera d’affichage l’écran sur chiffre Le .sation

 

 

 

-test/réinitiali de bouton le maintenez et appuyez temps même

 

7 Figure

 

en puis maximum, niveau de bouton le maintenez et appuyez

 

 

 

maximum, niveau de lecture la effacer ou réinitialiser Pour

 

 

 

maximum niveau de lecture la Réinitialiser

 

 

 

(suite) foncionnement et Caractéristiques

Image 12
Contents Kidde Par By KiddeTable of Contents Alarm was built by Nighthawk exclusively for Atwood Carbon Monoxide OverviewVu du produit Atwood Portes ouvertesModel 0143-900 digital-non Installation rapide Up Set QuickInstallation Instructions Where To Install Your Atwood CO Alarm’alarme MountingWhere not To Install Your Atwood CO Alarm Suite l’installation pour InstructionsFeatures and Operation of Digital Display Model Fonctionnement et CaractéristiquesDigital Display Shows CO level in PPM PPM en CO de niveau le Indique numérique AffichageNormal operation see with a full battery Other Possible Displays and Their MeaningsNormal Operation Peak Level DisplaySuite maximum niveau de mémoire de bouton Le Concentration shown may not be as Accurate as noted on Capteur de fonctionnement MauvaisTo test, press the test/reset button. Test the unit weekly Suite foncionnement et CaractéristiquesRed Alarm Light Green Operate LightIs pressed Battery Installation/Replacement Installation/ReplacementDuracell MN1500 What To Do If The Alarm Sounds Retentit l’alarme si faire QueCarbon monoxide can be fatal Page Page Caring for your Atwood Battery Powered CO Alarm ’alarme nettoyerDo not place near a diaper pail Carbone dePeindre Troubleshooting Guide Symptom Problem ActionProblème de cas en Conseils Frequently Asked Questions Questions Aux FoireWall Mounting Template HereProduct Specifications Produit du Spécifications+15ppm +20% Limited Warranty Limitée GarantieSuite Limitée Garantie Limited Warranty Garantie la de profiter PourLeft Blank Intentionally Intentionally Blank Left

KN-COPP-B specifications

The Atwood Mobile Products KN-COPP-B is a state-of-the-art carbon monoxide (CO) and propane gas detector designed specifically for recreational vehicles (RVs), campers, and other mobile environments. This device is essential for ensuring the safety of occupants by providing early warning signals when dangerous levels of carbon monoxide or propane gas are detected.

One of the standout features of the KN-COPP-B is its dual-sensor technology. This innovative system combines the detection capabilities for both carbon monoxide and propane, allowing it to monitor air quality continuously and offer protection from two potentially life-threatening gases. The detector uses advanced electrochemical sensors for CO detection, which are known for their reliability and accuracy.

The KN-COPP-B is designed for easy installation. It comes with a compact, lightweight design that fits seamlessly into any RV or camper setup. The detector can be mounted easily on walls or ceilings and operates on 12V power, making it compatible with the electrical systems found in most mobile vehicles.

This device also boasts a user-friendly interface. It features an intuitive LED indicator that provides status updates at a glance. When CO or propane is detected, the alarm will emit a loud alert, ensuring that occupants are immediately aware of any dangerous conditions. Additionally, the device includes a test/reset button, allowing users to verify that the detector is operational.

Durability is another significant characteristic of the Atwood KN-COPP-B. It is designed to withstand the rigors of mobile life and perform reliably in various environmental conditions. Whether faced with temperature fluctuations or vibrations from traveling, this detector continues to operate effectively.

With safety as a top priority in recreational vehicle usage, the Atwood Mobile Products KN-COPP-B delivers peace of mind for travelers. It meets stringent safety standards and complies with both UL and CSA certifications, ensuring its efficacy and reliability.

In summary, the Atwood Mobile Products KN-COPP-B stands out for its dual-sensor technology, ease of installation, robust design, and clear user interface. By integrating advanced detection for carbon monoxide and propane, this detector significantly enhances safety for anyone enjoying the open road or the great outdoors, making it an essential device for RV owners and camping enthusiasts alike.