Features, Specifications | Bacharach 19-9336 specification

Features

•Compact Gas Leak Detector - The Leakator Jr. detects and pinpoints combustible gas leaks in commercial, residential, and industrial applications, including surveying gas pipelines

•Wide Variety of Combustibles Detected - Acetone, Acetylene, Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen, Industrial Solvents, Iso-Butane, Methane, Methanol, Paint Thinners, Propane, Natural Gas, and Naptha.

•Compact and Ergonomic Design - Simple one button control allows the user to hold and operate the instrument in one hand. The flexible probe with sensor located at the tip allows leaks to be found in tight spaces.

•Leak Indication - The relative concentration of the combustible gas present is indicated by the frequency of the audible and visual alarms.

•Automatic Calibration - The instrument automatically calibrates itself during warm up when turned ON in fresh air.

•Selectable Sensitivity - High and low sensitivity mode selectable by a double press of the ON/OFF button. Pinpoints concentrations as small as 20 ppm in the high-sensitivity mode.

•Power - Four disposable ‘AA’ alkaline batteries provide a minimum of 14 hours of operation. A low battery indicator warns the user when the batteries need replaced. The instrument will also automatically turn itself OFF after a period of non-use to preserve battery life.

•UL 913 Approved - Intrinsically safe for Class I, Division 1, Groups A, B, C, and D.

•Sensor Error Indicator

•Low Power Metal Oxide Sensor

•Microprocessor Controlled Circuitry

SPECIFICATIONS

		Leakator Jr. instrument housed in a four piece molded ABS
	Package Contents	plastic case including 4 ‘AA’ batteries, cloth case, sensor,
		and instructions.
	Power	Four ‘AA’ alkaline batteries, 14 hours typical life for continuous
	Power	operation
		operation
	Warm-Up Time	Automatic, self check, about 60 seconds to operational
	Warm-Up Time	condition
		condition
	Sensor	Low power metal oxide sensor
	Probe	Self storing 12 inch flexible probe
	Sensitivity	20 ppm in high-sensitivity mode
	(Methane Based)	50 ppm in low-sensitivity mode
	Status Indicators	Visual: Red, Orange and Green LEDs
	Status Indicators	Audible: Variable speed beeping sound
		Audible: Variable speed beeping sound
	Environments	32 to 104°F (0 to 40°C)
	Dimensions	6H x 2W x 1.5D inches (152 x 51 x 38 mm)
	Weight	Less than 6 oz (170 g) with battery
	Safety Approvals	UL 913, intrinsically safe for use in Class I, Division 1,
	Safety Approvals	Groups A, B, C and D hazardous locations
		Groups A, B, C and D hazardous locations
	Warranty	2 years full warranty on instrument

19-9336 specifications

Bacharach 19-9336 is a highly regarded instrument known for its accuracy and reliability in the field of leak detection and gas analysis. Designed specifically for HVAC and refrigeration applications, it serves as a valuable tool for technicians and engineers involved in maintaining and servicing various systems.

One of the standout features of the Bacharach 19-9336 is its advanced sensor technology. The device employs a high-sensitivity infrared sensor capable of detecting a wide range of refrigerants, making it ideal for identifying leaks in both commercial and residential HVAC systems. This infrared technology not only enhances detection sensitivity but also enables the device to discriminate between refrigerants, reducing false alarms and improving diagnostic accuracy.

The ergonomic design of the Bacharach 19-9336 further enhances its usability. It is lightweight and compact, allowing for easy handling during inspections. The device is equipped with a flexible probe that can reach tight and hard-to-access areas, ensuring comprehensive coverage during leak detection tasks. The intuitive user interface features a bright, easy-to-read display that provides real-time readings, making it accessible for both seasoned professionals and those new to the technology.

Additionally, the Bacharach 19-9336 incorporates advanced data logging capabilities. Technicians can store measurement data for future reference or analysis, streamlining the reporting process. This feature is particularly beneficial in environments where compliance with regulatory standards is essential.

Another significant advantage of the Bacharach 19-9336 is its durability. Built with robust materials, it is designed to withstand the rigors of fieldwork, ensuring longevity and reliability. The device also features a rechargeable battery, providing convenience and ensuring it is ready for use whenever needed.

In conclusion, the Bacharach 19-9336 stands out as a top choice for professionals seeking a reliable, efficient, and user-friendly leak detection instrument. With its advanced sensor technology, ergonomic design, data logging capabilities, and robust build, it meets the demands of today’s HVAC and refrigeration specialists, making it an indispensable tool in safeguarding system performance and environmental compliance.