Costar 9SIR Locations to Avoid, Conditions Which can Result in Temporary CO Situations

Page 4

Instruction Manual: COSTAR® 9SIR, Residential CO Alarm

5.5CEILING LOCATION: Alarm should be mounted as close as possible to the center of a hallway or room. If this is not possible, the edge of the alarm should be at least 4 inches from any wall.

5.6LOCATIONS TO AVOID

Placing units where they will not operate properly causes nuisance alarms. To avoid nuisance alarms, do not place

units:

–Within 5 feet (1.5m) of any cooking appliance or furnace.

–Near an open window or door, because the fresh air entering the opening may delay CO from reaching the alarm.

–In damp or very humid areas or next to bathrooms with showers. Install detectors at least 10 feet (3 meters) away from bathrooms.

–In very cold or very hot environments or in unheated buildings or outdoor rooms where the temperature can go below or above the operating range of the alarm. Temperature limits for proper operation are 4.4° C to 37.8° C (40° F to 100° C).

–Good ventilation is recommended when household cleaning supplies or similar contaminants are used.

5.7CONDITIONS WHICH CAN RESULT IN TEMPORARY CO SITUATIONS:

5.7.1Excessive spillage or reverse venting of fuel burning appliances caused by outdoor ambient conditions, such as:

i)Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/humid air with extended periods between cycles).

ii)Negative pressure differential resulting from the use of exhaust fans.

iii)Simultaneous operation of several fuel burning appliances competing for limited internal air.

iv)Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.

v)Obstructions in or unconventional vent pipe designs which can amplify the above situations.

5.7.2Extended operation of unvented fuel burning devices (range, oven, fireplace, etc.)

5.7.3Temperature inversions, which can trap exhaust gasses near the ground.

5.7.4Car idling in an open or closed area garage, or near a home.

6.0INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY ! CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT REMOVABLE!

6.1Select proper location (See section 5.0)

6.2A mounting plate is provided on the back of the alarm. Remove the mounting plate from the back of the alarm by holding the mounting plate and twisting the alarm in the direction indicated by the "OFF" arrow on the alarm cover.

6.3To insure aesthetic alignment of the alarm with the hallway or wall, the UP ARROW on the mounting plate must

be:

A.)

Parallel with the hallway walls when ceiling mounting

B.)

Pointed upward when wall mounting

 

(See steps A & B in figure 4)

Step A: Ceiling mounting

Step B: Wall alignment

 

QGI P/N 099-0057-01 REV 10/26/01 Page 4 of 7

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Residential Use Carbon Monoxide Alarm Model 9SIRWhat YOU should Know about CO Developing Your OWN CO Safety Plan What YOU should do if the Alarm SoundsImportant Considerations Important What Your CO Alarm can and Cannot do Installing the Costar 9SIR for Residential USERecommendations Recommended Mounting LocationsConditions Which can Result in Temporary CO Situations Locations to AvoidStep a Ceiling mounting Step B Wall alignment Alarm Signals Step C Battery Installation Step D Installation / RemovalMaintenance Cleaning Your Alarm Periodic Alarm Testing Battery ReplacementService and Warranty Limited Warranty

9SIR specifications

The Costar 9SIR is an innovative solution in the realm of surveillance and security. Designed with a focus on high performance and versatility, the 9SIR stands out as a critical tool for modern security applications.

One of the main features of the Costar 9SIR is its high-resolution image capture capability. With advanced imaging technology, it provides crystal-clear images and videos, even in low-light situations. This ensures that security personnel can identify intruders or monitor activities accurately, minimizing the risk of false alarms or oversight.

Another prominent characteristic of the 9SIR is its robust construction. Built to withstand harsh outdoor conditions, the device has a weather-resistant design, making it suitable for various environments. Whether installed in a parking lot, construction site, or on public infrastructure, the Costar 9SIR offers reliable performance regardless of external factors.

The 9SIR is also equipped with advanced motion detection technologies. Utilizing sophisticated algorithms, it can differentiate between normal activity and potential security threats. This feature not only enhances the system's efficiency but also reduces unnecessary alerts, allowing security teams to focus on true incidents.

Moreover, the Costar 9SIR supports seamless connectivity options. With both wired and wireless configurations available, users can choose the installation method that best suits their needs. This flexibility enables easy integration into existing security systems, providing users with a comprehensive monitoring solution.

The 9SIR comes with a user-friendly interface, allowing operators to manage the device effectively. With an intuitive control panel, users can customize settings, view live feeds, and review recorded footage effortlessly. Additionally, the system supports remote access, facilitating management from any location through a secure connection.

Its scalability is another noteworthy aspect. The Costar 9SIR can be easily expanded to accommodate the growing needs of a facility. As security demands increase, additional units can be integrated into the existing system without significant disruption.

In summary, the Costar 9SIR is a powerful surveillance tool that combines high-resolution imaging, advanced motion detection, robust construction, and user-friendly management. Its adaptable design and easy scalability make it an ideal choice for businesses and organizations looking to enhance their security infrastructure. With the Costar 9SIR, users can confidently protect their assets and ensure a secure environment.
Top Page Image Contents