Important What Your CO Alarm can and Cannot do

Instruction Manual: COSTAR® 9SIR, Residential CO Alarm

3.3This CO alarm is designed for use within a single residential living unit only. In a multi-family building, the alarm may not provide early warning for residents if it is placed outside of the residential units, such as on outside porches, in corridors, lobbies, basements, or in other apartments. In multi-family buildings, each residential unit should have detectors installed as previously indicated.

3.4When properly located, installed, and maintained, this CO alarm is designed to provide early warning of developing poisonous CO conditions at a reasonable cost. This alarm monitors the air, and when it senses CO, it activates its built-in alarm. It can provide precious time for you and your family to escape from your residence before CO can seriously injure or kill. However, such an early warning is possible only if the alarm is located, installed, and maintained as specified in the Owner's Manual.

4.0IMPORTANT: WHAT YOUR CO ALARM CAN AND CANNOT DO

If bedroom doors are usually closed at night, alarms should be placed in each bedroom as well as in the common hallway between them. CO alarms may not sense CO on a different level of a residence or building. For example, a second floor alarm may not sense a CO leak on the first floor or in the basement.

Therefore, alarms should be placed on every level of a residence or building. If the alarm is located outside of a bedroom, it may not wake up a sound sleeper, especially if the bedroom door is closed or only partly open. If the alarm is located on a different level of the residence than the bedrooms, it is even less likely to wake up people sleeping in the bedroom. Installing CO alarms may qualify you for lower homeowner's insurance rates, but CO alarms are not a substitute for insurance. Homeowners and renters should continue to insure their lives and property.

!WARNING: The COSTAR® Model 9SIR CO Alarm is not designed for marine or RV use.

5.0INSTALLING THE COSTAR® 9SIR FOR RESIDENTIAL USE

5.1RECOMMENDATIONS

One of the most important considerations in any CO alarm system is the location of the alarms. Statistics of the

National Fire Protection Association (NFPA) show that most of the fatal CO occurrences happen at night while people are sleeping. Early warning of CO is best achieved by the correct installation of CO alarms. Placement of an alarm in a garage may cause an alarm due to CO from automotive exhaust.

5.2RECOMMENDED MOUNTING LOCATIONS

Put a CO alarm inside each bedroom where the occupant closes the door while sleeping. A closed door can block particulate smoke, but CO gas is likely to get through.

Figure 1: Recommended CO alarm placement for single floor residence.

Figure 2: Recommended CO alarm placement for multi- level residence.

5.3This CO alarm must be mounted on the wall or ceiling.

5.4WALL LOCATION: Locate the top of the alarm at least 3 feet (usually 5 to 6) feet from the floor.

Figure 3: Recommended CO alarm mounting location is 5 to 6 feet from floor.

QGI P/N 099-0057-01 REV 10/26/01 Page 3 of 7

9SIR specifications

The Costar 9SIR is an innovative solution in the realm of surveillance and security. Designed with a focus on high performance and versatility, the 9SIR stands out as a critical tool for modern security applications.

One of the main features of the Costar 9SIR is its high-resolution image capture capability. With advanced imaging technology, it provides crystal-clear images and videos, even in low-light situations. This ensures that security personnel can identify intruders or monitor activities accurately, minimizing the risk of false alarms or oversight.

Another prominent characteristic of the 9SIR is its robust construction. Built to withstand harsh outdoor conditions, the device has a weather-resistant design, making it suitable for various environments. Whether installed in a parking lot, construction site, or on public infrastructure, the Costar 9SIR offers reliable performance regardless of external factors.

The 9SIR is also equipped with advanced motion detection technologies. Utilizing sophisticated algorithms, it can differentiate between normal activity and potential security threats. This feature not only enhances the system's efficiency but also reduces unnecessary alerts, allowing security teams to focus on true incidents.

Moreover, the Costar 9SIR supports seamless connectivity options. With both wired and wireless configurations available, users can choose the installation method that best suits their needs. This flexibility enables easy integration into existing security systems, providing users with a comprehensive monitoring solution.

The 9SIR comes with a user-friendly interface, allowing operators to manage the device effectively. With an intuitive control panel, users can customize settings, view live feeds, and review recorded footage effortlessly. Additionally, the system supports remote access, facilitating management from any location through a secure connection.

Its scalability is another noteworthy aspect. The Costar 9SIR can be easily expanded to accommodate the growing needs of a facility. As security demands increase, additional units can be integrated into the existing system without significant disruption.

In summary, the Costar 9SIR is a powerful surveillance tool that combines high-resolution imaging, advanced motion detection, robust construction, and user-friendly management. Its adaptable design and easy scalability make it an ideal choice for businesses and organizations looking to enhance their security infrastructure. With the Costar 9SIR, users can confidently protect their assets and ensure a secure environment.