Advantech PCI-1718 Series Channel Configuration, S/E or Diff SW2, Summary of Switch SW2 Settings

Page 30

3.2.2 Channel Configuration, S/E or DIFF (SW2)

The PCI-1718 cards offer 16 single-ended or eight differential analog input channels. Slide switch SW2 changes the channels between single- ended or differential input. Slide the switch to the left-hand position, marked DIFF, for eight differential inputs (the default) or to the right- hand position, marked S/E, for 16 single-ended inputs.

Table 3.2: Summary of Switch SW2 Settings

Switch

Function description

SW2

Differential (default)

 

Single-ended

3.2.3 D/A Reference Voltage, int./ext. (JP11)

Jumper JP11 selects reference voltage source for PCI-1718 cards’ D/A converters. You can use the cards’ internal reference, or supply an exter- nal reference.

Table 3.3: Summary of Jumper JP11 Settings

Jumper Function description

JP11

External

 

Internal (default)

When you set JP11 to INT, the D/A converter takes its reference voltage input from the card's onboard reference. Jumper JP10 selects either -5 V or -10 V onboard reference voltage. With JP11 set to INT the D/A chan- nel has an output range of 0 to +5 V or 0 to +10 V, respectively.

PCI-1718 Series User Manual

22

Page 29 Page 31
Image 30
Page 29 Page 31
Contents PCI-1718 Series Bit Multifunction Cards with Universal PCI BusCopyright Acknowledgements Product Warranty 2 years Safety Precaution Static Electricity Technical Support and AssistancePacking List Contents Appendix Specifications Appendix D Calibration Viii Introduction PCI-1718HDU/HGU is register-level- pro Features PCI-Bus Plug & PlayAutomatic Channel/Gain Scanning Applications Onboard Programmable Timer/CounterBoardID Switch Onboard FifoInstallation Guide Installation Flow Chart Device Drivers Software OverviewProgramming choices for DA&C cards Register-level ProgrammingDevice Driver Programming Roadmap Programming ToolsTroubleshooting Device Drivers Error Programming with Device Drivers Function LibraryWiring Boards AccessoriesWiring Cables PCL-10120 PCL-10137Installation Unpacking Driver Installation SETUP.EXE on the companion CD-ROMSetup Screen of Advantech Automation Software Hardware Installation InstallationDevice Setup & Configuration Setting Up the DeviceConfiguring the Device Device Setting Dialog BoxTest Utility Dialog Box Signal Connections Switch and Jumper Settings OverviewSetting the BoardID Switch SW1 Board ID Setting SW1Summary of Jumper JP11 Settings Channel Configuration, S/E or Diff SW2Summary of Switch SW2 Settings 3 D/A Reference Voltage, int./ext. JP11Summary of Jumper JP10 Settings Internal Voltage Reference, -10 V or -5 V JP10Timer Clock Selection JP8 Summary of Jumper JP8 SettingsDigital Output, 20-pin or 37-pin Connector JP1 Summary of Jumper Settings6 Ext. trigger and Counter Gate 0 Control JP5 JP1 first Setting the Time to Reset Digital Outputs JP21 Jumper SettingsSignal Connections Pin Assignment1 I/O Connector Signal Description I/O Connector Signal DescriptionsAnalog Input Connections Single-ended Channel ConnectionsDifferential Channel Connections Correct Connection Incorrect ConnectionExpanding Analog Inputs Analog Output Connection Analog Output ConnectionsDigital Signal Connections GND D.GNDField Wiring Considerations Page Programming Guide Programming with the Driver Register ProgrammingSoftware Trigger and Polling EOC=0Example Code Pacer Trigger Mode with Interrupt ISRExample Code Page Enable Pacer Trigger Mode with Interrupt and Fifo Add you code here Clear System Interrupt*****/ Add you code here Add your code here Programming with LabVIEW and ActiveDAQ LabViewActiveDAQ Page Specifications Appendix a Specifications Analog InputAnalog Output Digital InputCounter/Timer Digital OutputGeneral Page Block Diagrams Appendix B Block Diagrams Register Structure & Format Appendix C Register Structure & Format I/O Port Address MapTable C.1 PCI-1718HDU/HGU Register Format Part Table C.2 PCI-1718HDU/HGU Register Format Part Table C.3 PCI-1718HDU/HGU Register Format Part A/D Data and Channels BASE+00H~01H Software A/D Trigger BASE+00HTable C.5 Register for Software A/D Trigger A/D Range Control BASE+01H PCI-1718HDUG3 and G2 are not used for PCL-818L MUX Scan Channel Control BASE+02H Table C.7 Register for MUX Scan Channel ControlProgramming example for PCI-1718HDU Table C.8 Register for MUX Scan Channel Status MUX Scan Channel Status BASE+02HDigital I/O Registers Base + 03/0BH Table C.9 Register for Digital OutputD/A Output BASE+04/05H Table C.10 Register for Digital OutputTable C.11 Register for D/A Output Fifo Interrupt Control BASE+06H Table C.12 Register for Fifo Interrupt ControlTable C.13 Register for Clear Interrupt Request Clear Interrupt Request BASE+08H12 A/D Status BASE+08H Table C.14 Register for A/D StatusMUX 13 A/D Control BASE+09H Table C.15 Register for A/D ControlTimer/Counter Enable BASE+0AH Programmable Timer/Counter BASE+0C~0FHTable C.16 Register for Timer/Counter Enable Table C.17 Register for Clear Fifo Interrupt Request Clear Fifo Interrupt Request BASE+14H17 A/D Data and Channel from Fifo Base + 17/18H Table C.18 Register for A/D Data and Channel from FifoTable C.19 Register for Fifo Status Fifo Status BASE+19HFifo Clear BASE+19H Table C.20 Register for Fifo ClearRegister Programming Flow Chart Software Trigger Mode with PollingPacer Trigger Mode with Interrupt Pacer Trigger Mode with Interrupt Fifo Used Page Calibration Appendix D Calibration VR Assignment Figure D.1 PCI-1718 VR AssignmentA/D Calibration Outputs is recommendedD/A Calibration

PCI-1718 Series specifications

The Advantech PCI-1718 Series represents a robust solution in the realm of data acquisition and control, designed to meet the demands of various industrial applications. This series is a prominent choice for engineers and system integrators looking to implement effective data monitoring and analysis in real-time conditions.

One of the notable features of the PCI-1718 series is its ability to handle multi-channel data acquisition, supporting up to 16 analog input channels. This capability allows for the simultaneous recording of multiple signals, which is critical in applications requiring comprehensive data analysis and monitoring. The device presents a sampling rate of up to 200 kHz, ensuring that even fast-changing signals are recorded with high fidelity.

The PCI-1718 Series also integrates 16-bit resolution for analog inputs, delivering precision that is essential for high-quality measurements. This level of resolution is particularly beneficial in industries such as medical instrumentation and scientific research, where the accuracy of data can significantly impact outcomes. Additionally, the device supports various input types, including voltage and current signals, making it adaptable to multiple sensing solutions.

In terms of connectivity, the PCI-1718 series is compatible with an array of I/O modules, enhancing its versatility. It supports both differential and single-ended input configurations, allowing users to select the most suitable measurement technique for their applications.

The series boasts built-in support for digital I/O and counters, facilitating the integration of control signals alongside data acquisition tasks. With 8 digital input lines and 8 digital output lines, the device allows for straightforward control over peripheral devices.

Advantech equipped the PCI-1718 with comprehensive software support, including drivers for popular programming environments, such as Visual Studio, LabVIEW, and MATLAB. This broad compatibility ensures that users can easily implement the hardware in their preferred software environments.

Another critical characteristic of the PCI-1718 Series is its robust design, featuring a low-profile PCI form factor that makes it suitable for various computer systems without compromising on performance. Its stable operation under fluctuating environmental conditions is facilitated through advanced engineering and high-quality components.

In conclusion, the Advantech PCI-1718 Series stands out with its multi-channel capabilities, high precision, extensive connectivity options, and solid software support. These features make it an exceptional choice for professionals in need of a reliable data acquisition system that can handle diverse and demanding applications efficiently.
Top Page Image Contents