GE ADEH50 Care and cleaning of the dehumidifier, Grille and Case, Water Bucket, Air Filter

Page 7

Care and cleaning of the dehumidifier.

GEAppliances.com

 

 

Turn off the dehumidifier and remove the plug from the wall outlet before cleaning.

Grille and Case

To clean the case:

To clean the front grille:

Use water and a mild detergent. Do not use

Use a vacuum attachment or brush.

bleach or abrasives.

 

Water Bucket

To clean:

Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Partially fill the bucket with clean water and add a little mild detergent.

Swish it around in the bucket, empty and rinse.

NOTE: Do not use a dishwasher to clean the water bucket.

To remove:

Remove the bucket and pour out any water.

To replace:

Slide the bucket into the dehumidifier.

NOTE: The bucket must be in place and securely seated for the dehumidifier to operate.

Air Filter

The air filter behind the front grille should

be checked and cleaned at least every 250 hours of operation or more often if necessary.

After 250 hours of operation, the Clean the Filter indicator light will glow to remind you to clean the filter. Remove the filter and clean it. Replace the filter and press the Filter Timer pad to turn off the Clean the Filter light.

To remove:

 

Remove the bucket. Grasp the filter edge, and pull it

NOTE: Avoid using a dishwasher to clean the filter.

straight down and out.

 

To clean:

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

NOTE: DO NOT rinse or put the filter in an automatic dishwasher.

CAUTION:

DO NOT operate the dehumidifier without a filter because dirt and lint will clog it and reduce performance.

7

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Image 7
Contents Dehumidifiers Do not use an adapter plug with this appliance Tips Care and Cleaning Operating InstructionsGEAppliances.com OperatingConsumer Support Power PadFilter Timer About the controls on the dehumidifierSafety Using the dehumidifierInstructions Operating Removing Collected Water InstructionsWater Level Air Filter Care and cleaning of the dehumidifierGrille and Case Water BucketIntended to use the bucket to DehumidifierWithin 60 minutes. See the Automatic Defrost section Water sectionOwnership Registration Page Customer Service What Is Not Covered Operating Instructions Safety InstructionsTips Care and Cleaning Order to Make a Warranty ClaimTroubleshooting Tips Consumer Support Care and Cleaning
Related manuals
Manual 36 pages 33.88 Kb

ADEH50 specifications

The GE ADEH50 is a cutting-edge heat pump that has gained significant attention in the market for its advanced features and energy-efficient technology. As homeowners and businesses alike seek sustainable solutions for temperature regulation, the ADEH50 emerges as a strong contender, combining efficiency, reliability, and innovative design.

At the heart of the GE ADEH50’s performance is its highly efficient variable-speed compressor. This technology enables the heat pump to adjust its output according to the immediate heating or cooling demands of a space. By operating at different speeds, the ADEH50 can maintain a consistent indoor temperature with minimal energy consumption, significantly reducing electricity costs compared to traditional single-stage systems.

Another noteworthy characteristic of the GE ADEH50 is its use of environmentally friendly refrigerants. The heat pump employs R-410A refrigerant, which has been recognized for its low global warming potential. This commitment to eco-friendly technology not only aligns with environmental regulations but also meets the growing consumer demand for sustainable products.

The ADEH50 also features advanced smart technology integration. It can be connected to Wi-Fi, allowing users to control their heating and cooling systems remotely via smartphone apps. This feature not only enhances convenience but also enables homeowners to optimize energy usage by adjusting settings according to occupancy patterns, ultimately leading to increased savings and a reduced carbon footprint.

In terms of design, the GE ADEH50 is built to withstand various weather conditions. Its robust construction includes a durable cabinet and corrosion-resistant components, ensuring longevity and reduced maintenance needs. The heat pump is also equipped with a quiet operation technology that minimizes noise, making it an ideal choice for residential areas where peace and comfort are a priority.

The GE ADEH50’s capacity options cater to diverse needs, making it suitable for different sizes of spaces. Its energy efficiency is reflected in its high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF) ratings, which signify its effectiveness in both cooling and heating modes.

In summary, the GE ADEH50 stands out in the heat pump market, offering a blend of advanced technology, environmental sustainability, and reliable performance. With its variable-speed compressor, smart technology integration, and durable design, it is an excellent investment for anyone looking to enhance comfort while promoting energy efficiency and sustainability in their living or working environment.