Humidistat

If pmenum is wider than stiffener:

2.The five reference hole marks you've made on the pbnum outline the area that must be cut out. Mark straight Hinesconnecting the five points.

WARNING: Wear safety giasses! Be sure not to driU or cut into air conditioner coii or tubing! BfebctMc driU is used, be sure it is propeMy grounded.

3.DriU or punch a iarge hob in one corner of the area to be cut out. This wiU aUow you to insert tin snips or a metai saw.

4.Cut along the lines connecting the five points. If any of the cut edges are rough, fib them smooth.

5.DriU the remaining hobs marked on the pbnum with a 1/8" drill bit.

6.Mount the stiffener with the mounting tabs facing out toward you. Use the seven sheet metal screws, supplied, to fasten the stiffener. Make sure the stiffener is flush with the plenum and is airtight. Seal around the edge with caulking (not furnished) if necessary.

7.Using the two finger grips (Fig. 9) on the lower edge of the front panel, simply lift the front panel about 1/8" straight up, swing the lower edge out, pull down until the front panel is free. Remove lower rod screw (Fig. 9).

Disconnect media motor wiring at the electrical disconnect. Grasp both ends of the electrical

disconnect and simply pull apart (Fig. 9).

WARNING: Do not pull on wires to separate electrical connector.

Upper Case Electrical Disconnect

Lower

Rod

Screw

Front	Reservoir	Lower
Panel	Assembly	Case
Finger Grips	Latch
Fig,	9

Remove the reservoir assembly. Remove the lower case from the humidifier by unfastening the latches on both sides and removing the lower rod screw. Set the lower case, reservoir media wheel assembly, and front panel aside. Remove the humidistat from the lower case.

8_ Hang the upper case assembly on plenum stiff- ener mounting tabs (Fig. 7). Tabs may have to be bent out slightly to fit into the slots in the back of the upper case assembly. Secure the upper case to the stiffener by pressing the capped fastener (No. 47, Page 16) through the back of the humidifier and into hole "A" (Fig. 10).

NOTE: It is very important that this fastener be used. If the upper case is not attached with the fastener, it could be dropped and damaged during routine maintenance.

Conduit Box

Hole "A"

Fig, 10

Locate the humidistat on the return (cold) air plenum (Fig. 11). DO NOT install the humidistat on the supply (hot) air plenum because the humidistat cannot accurately measure indoor relative humidity and will cause the humidifier to function improperly.

Cut

Hole

Supply

Air

Plenum

Return

Air

Plenum\\

Gasket

Fig, 11

2, The humidistat mounts in a horizontal position, Using gasket as a template, mark the location of the two mounting holes and the opening for the humidistat on the return air plenum,

3.Drill 1/8" holes for two mounting screws. Cut out the opening for the humidistat.

303.9380612 specifications

The Kenmore 303.9380612 is a versatile and efficient appliance designed to meet the needs of modern households. It stands out in the crowded market of home appliances due to its user-friendly features, innovative technologies, and commitment to performance.

One of the primary characteristics of the Kenmore 303.9380612 is its energy efficiency. This model is equipped with advanced energy-saving technologies that not only reduce electricity consumption but also help lower utility bills. Its Energy Star certification is a testament to its environmentally friendly design, ensuring that users can enjoy a high-performing appliance without the guilt of excessive energy use.

The Kenmore 303.9380612 boasts a spacious interior, allowing for a significant amount of storage, making it an ideal choice for families and individuals alike. The adjustable shelves provide flexibility to accommodate various items, from large pots and pans to smaller groceries. This adaptability ensures that users can maximize their storage potential without compromising accessibility.

Another notable feature is the smart temperature management system. The appliance comes with precise temperature control and even cooling technologies, ensuring that food remains fresh for longer periods. This is crucial for preserving the quality of perishable items, thereby reducing food waste and promoting sustainability at home.

The Kenmore 303.9380612 also incorporates user-friendly controls that enhance the overall user experience. The intuitive interface makes it simple to navigate through various settings, whether you're adjusting temperatures or accessing special modes designed for specific food types. Additionally, the clear display allows for effortless monitoring of performance, ensuring that users are always informed.

In terms of design, the sleek and modern aesthetic of the Kenmore 303.9380612 complements any kitchen decor. Its durable exterior is not only visually appealing but also resistant to scratches and stains, ensuring that it will maintain its pristine appearance over time.

Safety is another hallmark feature of this appliance. It comes with built-in features designed to prevent accidents, such as automatic shut-off mechanisms and door alarms. These elements provide peace of mind, particularly in households with children.

In summary, the Kenmore 303.9380612 combines energy efficiency with advanced technology, spacious storage, and user-friendly features, making it a top choice for anyone looking to enhance their kitchen. Its thoughtful design and commitment to performance ensure that it meets the needs of modern living while providing reliable service for years to come.