Draining the Unit, Manual Drain | EdgeStar DEP650EW, DEP400EW

	Draining the Unit
Manual Drain	The dehumidifier can be drained manually using the water bucket.
	When the bucket is full, the unit will automatically stop running, and
	the water full light will turn on.
	Follow the steps to remove the bucket and dump the water.

Warning: The water produced by the dehumidifier is not potable or suitable for drinking. Do not drink the water drained from the unit as it contains contaminates and could make you sick.

1) Slowly and carefully pull

2) Pull the bucket up by its

the bucket out by the

handle

handles until you see the

bucket handle.

3)Pour the water out. Do not place the bucket on the floor as its bottom is uneven and will fall down.

4)Reinstall the bucket.

Continuous Drain

The dehumidifier can be drained continuously to a floor drain.

1) Remove the water bucket from the unit, and you will find a hose

connector. You can use a 12 mm hose to attach to the connector.

Hose connector

Drain hose

2)Remove the rubber plug from the back of the unit’s drain hose outlet, and push the drain hose through.

3)Securely attach the drain hose to the connector. Lead the other end of the hose to a floor drain or other suitable drainage port.

4)You must reinstall the water bucket.