Crane EE-4109 manual Inserting Humidifier Filter, SET the Correct Humidity Output

Page 8

8.Use the humidity output regulator control knob to adjust the intensity of the vapor output. Turning the knob clockwise will increase the moisture output, turning the knob counterclockwise will reduce the moisture output.

(see Fig. 10)

Fig. 10

9.When the humidifier runs out of water the power light will turn red, and the mist output will stop. This is a safety feature to prevent the humidifier from possibly over heating and damaging the nebulizer. This safety feature uses a water level sensor to stop the nebulizer once the water level sinks below the required level in the water basin. Turn the humidifier off and unplug before removing and refilling the water tank. Please note that the Power Light on the humidifier body will stay on.

The (red) light signal indicates that the humidifier is turned on and needs to be refilled.

INSERTING HUMIDIFIER FILTER

(SOLD SEPARATELY not included with your humidifier)

A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to eliminate white dust caused by hard water and to reduce mold spores and bacteria that can build up in your humidifier.

Place humidifier filter in humidifier as shown in Fig. 10A

NOTE: Do not leave filter in humidifier longer than recommended time. See filter instructions on filter box packaging.

Filters are not included with the humidifier and can be purchased separately.

Fig. 10 A

SET THE CORRECT HUMIDITY OUTPUT

ALWAYS PLACE THE HUMIDIFIER ON AN ELEVATED NON-METALLIC WATERPROOF SURFACE FOR BEST PERFORMANCE.

Adjust the vapor control so that the vapor rises up and gets absorbed by the room air. Do not turn on too high output as the vapor cannot be absorbed by the air and accumulates on the surface around the humidifier.

If the humidifier is placed near a fan or air conditioning outlet the vapor may be forced down by the foreign air stream.

Change the location of the humidifier or reduce the output of the other room conditioning appliances.

correct

wrong

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GALLON/ 3.78 Liter Ultrasonic Humidifier MODEL# EE-4109Table of Contents Important Safety Instructions IntroductionGeneral Safety Instructions Safety WarningList of Main Parts Parts Description Vapor Outlet Channel Water Tank HandleOperation and USE Before Each USE Technical SpecificationsContents of Packaging Assembly See FigInserting Humidifier Filter SET the Correct Humidity OutputMaintenance Disinfecting the Water Tank and Water BasinGeneral Maintenance and Cleaning Trouble Shooting Storing Your HumidifierService Center Environmental ProtectionWarranty Information Page Warranty Card Hello Kitty Ultrasonic Humidifier

EE-4109 specifications

The Crane EE-4109 is a robust and versatile electromechanical actuator designed for a variety of industrial applications. Known for its reliability and performance, this actuator excels in environments where precision and durability are paramount.

One of the primary features of the EE-4109 is its impressive load capacity, which allows it to handle substantial weight while maintaining operational efficiency. Its ability to tackle demanding tasks makes it an ideal choice for industries such as manufacturing, material handling, and automation. The actuator is designed to facilitate smooth and controlled movements, ensuring that operations are carried out with minimal disruption.

The EE-4109 incorporates advanced technologies that enhance its functionality. One key technology is its high-performance electric motor, which provides superior torque and speed control. This motor is engineered to deliver consistent performance, even under heavy load conditions. Additionally, the actuator features a sophisticated feedback system that allows for real-time monitoring of its operational status, providing users with critical data to optimize performance.

In terms of design, the Crane EE-4109 is built with durability in mind. It features a robust housing constructed from high-strength materials, ensuring that it can withstand harsh environmental conditions such as temperature fluctuations, moisture, and dust. The actuator’s components are designed to minimize wear and tear, extending its lifespan and reducing maintenance costs.

Another notable characteristic of the EE-4109 is its modular design, which simplifies installation and allows for easy customization. Users can modify the actuator to fit specific application needs, enhancing its versatility across different use cases. The actuator is also compatible with various control systems, enabling seamless integration into existing setups.

Safety is a priority with the EE-4109, which includes built-in protection features to prevent overload and overheating. These safeguards ensure that the actuator operates within safe parameters, reducing the risk of malfunction and increasing operational reliability.

In conclusion, the Crane EE-4109 is a high-performance electromechanical actuator that combines superior load capacity, advanced technologies, and a robust design. Its versatility, durability, and safety features make it an excellent choice for industries in need of reliable motion control solutions. Whether for heavy lifting, automated processes, or precise positioning, the EE-4109 stands out as a leading actuator in its category.
Top Page Image Contents