Crane EE-4109 manual Maintenance, Disinfecting the Water Tank and Water Basin

Page 9

A NOTE ABOUT HUMIDITY

ƒIt is best to keep the humidity level at about 30-50 percent of relative humidity.

ƒThe comfort level of humidity will vary from room to room and with changing room conditions.

ƒIn cold weather, windows and even some walls may fog or develop frost from excessive indoor humidity. If this occurs, reduce the mist intensity setting to avoid damage from condensed water dripping on windowsills.

ƒToo much humidity in the room may allow moisture to accumulate on surfaces where bacteria and fungi can grow. Moisture that gathers may also damage furniture and walls, especially wallpaper.

ƒTo eliminate excessive humidity, especially in small rooms, leave the room door open and adjust the mist intensity control setting.

MAINTENANCE

CAUTION:

Always be sure that the appliance is unplugged and switched OFF before cleaning or attempting to store the item. NEVER PLUG OR UNPLUG UNIT WITH WET HANDS.

DO NOT leave water in water tank or water basin when unit is not in use as it may result in the build up of mineral deposits and bacteria that can inhibit the output efficiency of the humidifier.

PLEASE NOTE that if water remains in the water tank for more than a day or two, bacterial growth is possible.

ALWAYS use fresh cool water when using unit.

NOTE: When removing water tank, water may accumulate under vapor lid and on the bottom of the water tank. It is recommended to have a dry cloth ready to dry wet surfaces.

DISINFECTING THE WATER TANK AND WATER BASIN

1.Fill water tank with 1 teaspoon of household bleach in 1 gallon of water. Let stand for twenty minutes, shaking vigorously with two hands every few minutes, drain and rinse with clean water until the bleach smell is gone. Dry with a clean cloth or paper towel.

2.Wipe the water basin with a soft cloth dampened in the bleach and water solution. Rinse the water basin with cool water to remove any bleach smell. DO NOT IMMERSE WATER BASIN IN WATER.

3.Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the base in water or use water to clean the base. An electric shock may result or the humidifier may be damaged.

NOTE: It is recommended to clean humidifier with water and bleach solution as stated above after using the humidifier the fourth time.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MODEL# EE-4109 GALLON/ 3.78 Liter Ultrasonic HumidifierTable of Contents Introduction Important Safety InstructionsSafety Warning General Safety InstructionsVapor Outlet Channel Water Tank Handle List of Main Parts Parts DescriptionTechnical Specifications Contents of PackagingOperation and USE Before Each USE See Fig AssemblySET the Correct Humidity Output Inserting Humidifier FilterDisinfecting the Water Tank and Water Basin MaintenanceGeneral Maintenance and Cleaning Storing Your Humidifier Trouble ShootingEnvironmental Protection Service CenterWarranty Information Page Hello Kitty Ultrasonic Humidifier Warranty Card

EE-4109 specifications

The Crane EE-4109 is a robust and versatile electromechanical actuator designed for a variety of industrial applications. Known for its reliability and performance, this actuator excels in environments where precision and durability are paramount.

One of the primary features of the EE-4109 is its impressive load capacity, which allows it to handle substantial weight while maintaining operational efficiency. Its ability to tackle demanding tasks makes it an ideal choice for industries such as manufacturing, material handling, and automation. The actuator is designed to facilitate smooth and controlled movements, ensuring that operations are carried out with minimal disruption.

The EE-4109 incorporates advanced technologies that enhance its functionality. One key technology is its high-performance electric motor, which provides superior torque and speed control. This motor is engineered to deliver consistent performance, even under heavy load conditions. Additionally, the actuator features a sophisticated feedback system that allows for real-time monitoring of its operational status, providing users with critical data to optimize performance.

In terms of design, the Crane EE-4109 is built with durability in mind. It features a robust housing constructed from high-strength materials, ensuring that it can withstand harsh environmental conditions such as temperature fluctuations, moisture, and dust. The actuator’s components are designed to minimize wear and tear, extending its lifespan and reducing maintenance costs.

Another notable characteristic of the EE-4109 is its modular design, which simplifies installation and allows for easy customization. Users can modify the actuator to fit specific application needs, enhancing its versatility across different use cases. The actuator is also compatible with various control systems, enabling seamless integration into existing setups.

Safety is a priority with the EE-4109, which includes built-in protection features to prevent overload and overheating. These safeguards ensure that the actuator operates within safe parameters, reducing the risk of malfunction and increasing operational reliability.

In conclusion, the Crane EE-4109 is a high-performance electromechanical actuator that combines superior load capacity, advanced technologies, and a robust design. Its versatility, durability, and safety features make it an excellent choice for industries in need of reliable motion control solutions. Whether for heavy lifting, automated processes, or precise positioning, the EE-4109 stands out as a leading actuator in its category.
Top Page Image Contents