Danby DDR2509EE manual KEY PAD Functions

Page 7

 

KEY PAD FUNCTIONS

8

1

 

4

2

5

 

3

7

6

1)LED Readout (ROOM HUMIDITY): The LED window displays the following information independently:

A) Internal (Room/Environment) Relative Humidity Conditions

B) Set Operating Relative Humidity Value.

NOTE: The LED readout is programmed to default to display the ambient relative humidity conditions.

To view the Set Operating Relative Humidity Value, press the “up” or “down” button (once) and the set RH operating value will flash for approximately 5 seconds in the LED window, then revert back to display the internal RH value.

2)ON/OFF Button: Each time this button is pressed the unit turns ON (adjacent indicator light illuminates) or Off (adjacent indicator light is not illuminated)

3)CONTINUOUS: Used for Continuous Dehumidifier Operation (unit will run non-stop). NOTE: Humidity values (settings) cannot be programmed in this mode. The adjacent (green) indicator light illuminates to signify the “continous” mode is currently in operation.

4)HUMIDITY UP: This button allows you to increase the relative humidity setting. Each time this button is pressed, the RH value set- ting is increased incrementally by 5% (ranging from 35% - 80%)

5)HUMIDITY DOWN: This button allows you to decrease the relative humidity setting. Each time this button is pressed the RH value setting is decreased incrementally by 5% (ranging from 80% - 35%).

6)HIGH FAN: The adjacent (green) indicator light illuminates when HIGH FAN is selected.

7)LOW FAN: The adjacent (green) indicator light illuminates when LOW FAN is selected.

8)WATER FULL INDICATOR: This (red) light illuminates under the following conditions:

A)When the internal water tank is not properly installed inside the cabinet.

B)When the internal water tank is full. The water tank must be emptied and replaced back in the cabinet before normal operating conditions can resume.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DDR2509EE DDR3009EE DDR4009EE Model ModèleTable of Contents Keep These Instructions for Future Reference WelcomeGrounding Instructions For Your SafetyUnit Specifications Electrical SpecificationsUSE Plug Adapters or Extension Cords Unit Parts Identification InstallationFeatures LocationKEY PAD Functions Operating Instructions Indicator Light FunctionWater Tank Operation FAN Speed Selection Dehumidifying Mode SelectionDehumidifying AIR FilterDirect Drain Instructions Connecting the Direct DrainStorage Care and MaintenanceTroubleshooting Guide ProblemLimited Dehumidifier Warranty Opération Table DES MatiéresBienvenue Spécifications ÉlectriquesNuméro de modèle Numéro de série Date d’achat BienvenueDES Utilisateurs AVERTISSEMENT- Avis ImportantsRemarque Pour LA SécuritéSpécifications DE L’UNITÉ Spécifications ÉlectriqueCaractéristiques Choix DE L’EMPLACEMENTComposants DE L’APPAREIL Fonctions DES Touches DU Tableau DE Commande Function DES Témoins Lumineux OpérationRéceptacle EAU Ventilateur Mode DE DéshumidificationSélection DU Mode DE Déshumidification Filtre À AIRInstructions Pour Drainage Direct Remisage ProblemeSoins ET Entretien NettoyageGarantie Limitée DE Déshumidificateur Portable Dehumidifier DDR2599EEDéshumidifcateur Portatif

DDR2509EE specifications

The Danby DDR2509EE is a high-performance dehumidifier designed to combat humidity in spaces up to 2,500 square feet. It is particularly effective in areas such as basements, laundry rooms, and other moisture-prone environments. Equipped with state-of-the-art technologies, this unit not only helps to improve air quality but also fosters a healthier living environment by reducing mold and mildew.

One of the standout features of the Danby DDR2509EE is its ability to remove up to 25 pints of moisture from the air daily. This capacity makes it ideal for medium-sized rooms, ensuring that moisture levels are kept in check. The tank has a generous 16.5-pint capacity, enabling longer operation times before requiring a refill, which makes it both convenient and efficient.

An important aspect of the Danby DDR2509EE is its Energy Star certification. This designates it as an energy-efficient option, reducing energy consumption without compromising performance. Users benefit from lower utility bills while enjoying effective moisture control.

The unit features a Continuous Drain option, allowing for uninterrupted operation by connecting a standard garden hose to the dehumidifier's drain outlet. This is particularly useful for extended use, as it eliminates the need to manually empty the water tank frequently.

Another key characteristic is its user-friendly electronic controls, which include a programmable timer and adjustable humidistat. This allows users to easily set their desired humidity levels. The smart set-and-forget feature enables automatic operation, ensuring that the unit works optimally according to the conditions of the environment.

Additionally, the Danby DDR2509EE comes with a washable air filter that can be easily removed and cleaned. This helps maintain a clean airflow and prolongs the life of the dehumidifier.

Quiet operation is another important feature, allowing users to run the machine without disturbance, making it suitable for bedrooms or workspaces. The Danby DDR2509EE is lightweight and portable, equipped with side handles and caster wheels for easy movement.

Overall, the Danby DDR2509EE is a reliable and efficient solution for reducing humidity, improving air quality, and enhancing comfort in various living spaces. With its combination of power, efficiency, and user-friendly features, it stands out as an excellent choice for anyone looking to tackle moisture issues effectively.
Top Page Image Contents