Miele CS 1028 Frequently asked questions, Flame does not stay lit Possible fault Solution

Page 18

Frequently asked questions

￿Repairs should only be carries out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work.

The burner does not ignite after several attempts.

Possible fault

Solution

 

 

The burner is not assembled correctly.

See "Cleaning and Care -

 

Reassembling the burner".

 

 

The gas supply is not turned on.

Turn on the gas supply.

 

 

The burner is dirty.

See "Cleaning and care".

 

 

The flame holes are wet or blocked.

See "Cleaning and care".

 

 

The flame does not stay lit.

 

 

 

Possible fault

Solution

During the ignition process, the flame needs to touch the ignition safety control so that it heats up. If the flames does not touch, check that:

The burner is seated correctly.

There is no soiling on the ignition safety control.

See "Cleaning and Care - Reassembling the burner".

The igniter does not spark.

Possible fault

 

Solution

 

 

 

The circuit breaker has tripped.

 

Re-set the circuit breaker. Contact an

 

 

electrician for assistance if in doubt.

 

 

 

Food has deposited itself between the

 

See "Cleaning and care".

ignitor and the burner cap.

 

 

 

 

 

Food has deposited on the ignition

 

See "Cleaning and care".

safety control.

 

 

 

 

 

The flame appears different than usual.

 

Possible fault

 

Solution

 

 

 

The burner is assembled incorrectly.

 

Reassemble the burner as shown in

 

 

"Cleaning and Care - Burner".

 

 

 

18

Image 18
Contents Operating and Installation Instructions Gas Combiset What to do if YOU Smell GAS Contents Correct usage ChildrenTechnical safety Safety Important Safety Instructions Review Them Periodically Guide to the combiset Burner Before using the combiset Cleaning the combisetOperation Turning on and off / RegulatingTurning on Using the cooktop during a power failure Adjusting the flameTurning off Pans Pan sizeSuitable pans Safety features Ignition Safety ControlCleaning and care CombisetReassembling the burner Igniter does not spark Possible fault Solution Frequently asked questionsFlame does not stay lit Possible fault Solution Flame appears different than usual Possible fault SolutionTechnical Service MieleCare Installation Instructions Installation Safety distances above the appliance Safety distances to the sides of the appliance RecommendedNot recommended Not allowed Installation Safety distance from the wall coveringInstallation dimensions Cut out Installation of multiple appliances Countertop Cut-outInstallation Attach the spring clips and support bars Wood or solid surface countertopsGranite countertop Installing the appliance / appliances Removing the applianceSealing Tiled surfaces Power supply Electrical connectionWiring Diagram Gas connection Gas pressure regulator Nominal ratings Maximum output Gas type BTU/hrMinimum output Gas type BTU/hr Converting to another type of gas Help protect our environment Disposal of packing materialsDisposal of an old appliance Page

CS 1028 specifications

The Miele CS 1028 is a high-end steam and combination cooking appliance that seamlessly integrates into any kitchen, elevating the culinary experience to new heights. Known for its precision and efficiency, the CS 1028 is a versatile addition that brings professional-grade cooking methods into the home environment.

One of the standout features of the Miele CS 1028 is its steam cooking capability. The appliance can generate steam in seconds, allowing for healthier meal preparation by preserving nutrients in food. Steam cooking is perfect for vegetables, fish, and even desserts, enhancing flavors without the need for excessive oils and fats. The CS 1028 features a generous water reservoir, which reduces the need for frequent refills, and the integrated water filter ensures that the steam produced is pure and clean.

The combination oven function of the CS 1028 is another highlight. This appliance combines the benefits of both steam and conventional cooking methods, offering options such as baking, roasting, and gentle cooking. With precise temperature control and a variety of cooking modes, users can achieve perfect results every time. The oven's convection feature ensures even heat distribution, making it ideal for baking pastries or roasting meats to perfection.

Another impressive characteristic of the Miele CS 1028 is its intuitive user interface. The appliance is equipped with a clear, user-friendly control panel that allows users to program cooking times, temperatures, and modes. The appliance also comes with a cookbook that includes a variety of recipes specifically designed for steam cooking, empowering users to experiment and explore new culinary techniques.

In terms of design, the Miele CS 1028 is built with high-quality materials that ensure durability and longevity. Its sleek, modern styling fits seamlessly into any kitchen aesthetic, while its compact size makes it suitable for both small and large kitchens alike. The easy-to-clean surfaces and the self-cleaning function save time and effort, making maintenance a breeze.

In conclusion, the Miele CS 1028 is a remarkable appliance that combines advanced steam cooking with traditional oven features. Its versatile cooking capabilities, smart technologies, and elegant design make it an ideal choice for both amateur cooks and seasoned chefs looking to elevate their kitchen experience. With the Miele CS 1028, preparing healthy, delicious meals has never been easier or more enjoyable.