DCS BGB132-BI, BGB131-BI manual Spider and Insect Warning, Installation of Side Burner

Page 5

SAFETY PRACTICES & PRECAUTIONS

SPIDER AND INSECT WARNING!

Spiders and insects can nest in the burner(s) or orifices of this or any other gas appliance, and can block or restrict the burner. This can cause a flash back to the control panel. This is a very dangerous condition which can cause a fire to occur, thereby damaging the unit and making it unsafe to operate.

You must inspect the burner(s) at least once a year or immediately if any of the following conditions occur:

1.The smell of gas in conjunction with the burner flames appearing yellow.

2.The Professional Side Burner does not reach temperature.

3.The Professional Side Burner heats unevenly.

4.The burner(s) make popping noises.

Do not attempt to disconnect any gas connections while your burner is in use, or the gas supply is on.

When the Professional Side Burner is stored indoors the gas supply must be disconnected and, if using an LP gas cylinder, the cylinder must be stored outdoors in a well-ventilated area.

Keep any electrical supply cord away from the heated surfaces of the Professional Side Burner.

On cart mounted units, never move without first allowing the Side Burner and/or grill to cool and ensuring that the gas supply is turned off. Fold the side shelf down, and push; never pull the grill.

Never use the Professional Side Burner in a windy area.

SIDE BURNER 131/132 SIDE MOUNT MODEL INSTALLATION

INSTALLATION OF SIDE BURNER:

All BGB131 and BGB132 models can be installed in combustible enclosure with zero clearance from the back, sides and bottom.

A minimum of 6” from the back and sides must be maintained from the Professional Side Burner above the cooking surface and a minimum of 1” below the cooking surface to combustible construction (see Fig. 01).

When determining a suitable location, take into account concerns such as exposure to wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Locate the Side Burner only in a well- ventilated area. Never locate the Side Burner in a garage, breezeway, shed, or other such enclosed areas.

6"

 

1" min.

 

IGNITION

BURNER

.01

 

4

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Professional Side Burner Please Retain this Manual for Future Reference Message to OUR CustomersTable of Contents Safety Practices & Precautions Spider and Insect Warning Installation of Side BurnerSide Burner 131/132 Side Mount Model Installation Installation of Side Burner BUILT-IN Side Burner BUILT-IN Model InstallationStandard construction Natural GAS HOOK-UP GAS RequirementsLP Tank Requirements LP GAS HOOK-UPLighting Instructions Leak Testing & Lighting InstructionsLighting Instructions Burner Efficiency and Flame CharacteristicsMatch Lighting BurnersGeneral Cleaning Final ChecklistStainless Steel Side Burner GrateIgniters Problem What to do TroubleshootingSingle Side Burner Parts List for BGB131 & BGB131-BI For BGB132 & BGB132-BI Double Side Burner Parts ListSingle & Double Side Burner Wiring Diagram Length of Warranty WarrantyDCS will PAY for DCS will not PAY forBefore YOU Call for Service ServiceHOW to Obtain Service

BGB131, BGB131-BI, BGB132-BI, BGB132 specifications

The DCS series, particularly models BGB132, BGB132-BI, BGB131-BI, and BGB131, represents a significant advancement in the field of automation and control systems. These models are designed to cater to a variety of industrial applications, providing high efficiency, reliability, and advanced functionality that meets modern operational demands.

The BGB132 and BGB132-BI models are engineered for enhanced performance in rigorous environments. They incorporate cutting-edge technology that ensures precise control and monitoring of various processes. This series is characterized by its advanced computational capabilities, allowing for real-time data processing and analysis, which is critical for maintaining operational integrity and optimizing performance.

One of the standout features of the BGB132-BI model is its built-in intelligence. This model integrates smart algorithms that enhance decision-making processes, enabling users to respond swiftly to changing conditions. Moreover, the BGB132-BI’s self-diagnostic capabilities provide valuable insights into system health, ensuring operators can prevent potential issues before they escalate.

The BGB131 and BGB131-BI models, while slightly more compact, do not compromise on functionality or performance. The BGB131 offers robust control solutions ideal for smaller-scale operations or environments where space is a constraint. Its design ensures easy integration with existing systems, making it a versatile choice for various industrial setups.

The BGB131-BI model enhances the standard BGB131 with additional smart technology features. This version supports advanced data analytics and offers a user-friendly interface, allowing for seamless interaction and improved accessibility for operators. Both models are built to withstand harsh industrial conditions, ensuring longevity and reduced maintenance costs.

Key characteristics across the DCS BGB series include modular design, intuitive user interfaces, and flexible connectivity options. The modular approach facilitates easy upgrades and expansions, catering to evolving business needs. Additionally, their compatibility with various communication protocols allows for integration with diverse industrial systems, enhancing overall operational synergy.

In summary, the DCS BGB132, BGB132-BI, BGB131-BI, and BGB131 models are designed to provide state-of-the-art control solutions with an emphasis on efficiency, reliability, and user-friendly features. They embody the principles of modern automation technologies, setting a new standard in industrial control systems and paving the way for future advancements in the field.
Top Page Image Contents