Beckett CF375 manual Initial indicator adjustment plate settings head position

Page 11

‰Start-up checklist

‰Combustion air supply and venting have been inspected and verified to be free of obstructions and installed in ac- cordance with all applicable codes.

‰Oil nozzle has been selected correctly and securely in- stalled in the nozzle adapter.

‰Fuel unit by-pass plug has not been installed for one- pipe oil system.

‰By-pass plug has been installed for two-pipe oil system.

‰Fuel connection to nozzle line assembly is secure.

‰Dimension Z has been set per this instruction manual.

‰Fuel supply line is correctly installed, the oil tank is suf- ficiently filled, and shut-off valves are open.

‰Burner is securely mounted in appliance, with pressure firing plate and gasket installed for pressurized chamber application.

‰Appliance has been filled with water (boilers) and controls have been operationally checked.

‰Burner has been installed in accordance with appliance manufacturer’s instructions (when available).

‰Also refer to appliance manufacturer’s instructions (when available) for start-up procedures.

‰Z dimension

Should be set per the Set Z Dimension instructions detailed earlier in this manual. The acorn nut (Fig- ure 6, item c) should never be loosened once the Z dimension is initially set.

‰Initial head position (Figure 6)

yThe indicator plate assembly markings correspond to head position settings.

yLoosen the fastener (Figure 6, item d) and slide the indicator plate until the number on the indicator plate corresponds to the initial head setting listed in Table 3, for the desired firing rate.

yWhen the head position has been set, tighten the fastener and the spline nut.

Table 3 - Initial indicator adjustment plate settings (head position)

Approximate adjust-

Firing rate, gph

ing plate setting

 

0

1.65

1

1.75

3

2.00

4

2.50

5

3.00

6

3.50

 

These settings are approximate,

NOTE

and can vary depending on

actual job conditions and overfire

 

 

pressure.

‰Initial air settings (Table 4)

yLoosen the air band and shutter, and adjust to the approximate firing rate settings given in Table 4.

yThese initial settings should be adequate for starting the burner. Once the burner is in operation, the air settings will be adjusted for best performance as discussed later in this manual.

yFollow the procedures described later in this manual for fine-tuning the air settings.

Table 4 - Initial air shutter and band settings

Firing rate,

Approximate head settings

gph

Shutter

Band

1.65

5

0

1.75

10

2

2.00

10

4

2.50

10

5

3.00

10

6

3.50

10

8

 

 

 

 

These settings are approximate, and can

NOTE

vary depending on actual job conditions

 

and overfire pressure.

 

‰Set appliance limit controls

ySet the appliance limit controls in accordance with the appliance manufacturer’s recommendations.

‰Prepare the fuel unit for air venting

yTo vent air from one-pipe oil systems, attach a clear hose to the vent plug on the fuel unit. Provide a container to catch the oil. Loosen the vent plug.

yVent the air as described in the next section under Start the burner.

6104 BCF3 R02

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents To the Homeowner or Equipment Owner To the Professional, Qualified Installer or Service AgencyPotential for Fire, Smoke and Asphyxiation Hazards Table of Contents Agency approvals Before you beginProtect Against Dust Moisture Pre-installation check- listFollow These Instructions Exactly Protect Against Stray Light LockoutCorrect Nozzle and Flow Rate Required Oil Supply Pressure Control Required‰ Verify air tube Nozzle Capacities‰ Verify firing rate Protect the Air Tube From Overheating Mount the burnerInstall Oil Supply To Specifications Do Not Install By-pass Plug with 1-Pipe System‰ Burner fuel flow Wire the burner R7184Electrical Shock Hazard Fuel unit gearset capacitiesPrepare the burner for start-up Professional Installation Service RequiredDo Not Bypass Safety Controls Keep Service Access Covers Securely InstalledInitial indicator adjustment plate settings head position Hot Gas Puff-back Heavy Smoke Hazard Explosion and Fire HazardAnnual service by qualified service techni- cian Maintenance and Ser- viceAnnual Professional Service Required Monthly maintenance by owner Replacement parts Limited Warranty Information Warranty
Related manuals
Manual 36 pages 29.5 Kb

CF375 specifications

The Beckett CF series, encompassing models CF3500A, CF2500A, CF2300A, CF800, and CF375, represents a robust lineup of oil burners designed for residential and commercial heating applications. These models are engineered for efficiency, reliability, and ease of use, making them a preferred choice among HVAC professionals and homeowners alike.

The CF3500A is a high-capacity model that excels in providing consistent heating for larger spaces. With a firing rate of up to 3.5 gallons per hour, it is equipped with advanced nozzle technology that improves fuel atomization, resulting in better combustion efficiency. This model features a compact design, making it easy to install in various settings, and it includes an integrated control module for straightforward operation.

The CF2500A offers impressive performance with a moderate firing rate suitable for mid-sized buildings. It incorporates Beckett's patented Clean Cut design which minimizes smoke and reduces emissions. This model also comes with a diagnostic LED display, allowing for quick identification of system status and potential issues, enhancing maintenance efficiency.

The CF2300A is tailored for smaller applications while still maintaining a strong performance profile. Its compact size does not compromise power, as it utilizes advanced combustion technologies to ensure effective heating. The user-friendly interface allows for effortless adjustments, and its low profile design fits into tight spaces, making it ideal for residential use.

For applications requiring versatility, the CF800 stands out with a multi-fuel capability, allowing it to run on both oil and biodiesel. It boasts an energy-efficient design that contributes to cost savings over time. The CF800's unique air delivery system enhances combustion efficiency, reducing noise levels and improving overall comfort in the living environment.

Finally, the CF375 is designed for high-efficiency performance in professional settings. Its durable construction ensures long-lasting service, and it is equipped with advanced control systems that optimize fuel delivery and combustion. This model is particularly noted for its low emissions, aligning with modern environmental standards while providing reliable heating.

Together, the Beckett CF series exemplifies cutting-edge technology and engineering excellence, catering to diverse heating needs. Each model is a testament to Beckett’s commitment to energy efficiency, performance, and environmental responsibility, making them suitable choices for both residential and commercial heating applications.
Top Page Image Contents