Beckett CF375 manual Pre-installation check- list, Follow These Instructions Exactly

Page 4

Owner’s Responsibility:

Follow These

Instructions Exactly

Failure to follow these instructions, misuse, or incorrect adjustment of the burner could lead to equipment malfunction and result in asphyxia- tion, explosion or fire.

Contact a professional, qualified service agency for the installation, adjustment and service of your oil burning system. Thereafter, have your equipment adjusted and inspected at least annually to ensure reliable operation. This work requires technical training, trade experience, licensing or certification in some states and the proper use of special combustion test instruments.

Please carefully read and comply with the following instructions:

yNever store or use gasoline or other flammable liquids or vapors near this burner or appliance.

yNever attempt to burn garbage or refuse in this appli- ance.

yNever attempt to light the burner by throwing burning material into the appliance.

yNever attempt to burn any fuel not specified and ap- proved for use in this burner.

yNever restrict the air inlet openings to the burner or the combustion air ventilation openings in the room.

Professional Installer/Service Agency Responsibility:

Follow These

Instructions Exactly

Failure to follow these instructions could lead to equipment malfunc- tion and result in asphyxiation, explosion or fire.

yPlease read all instructions before proceeding. Follow all instructions completely.

yThis equipment must be installed, adjusted and started by a qualified service agency that is experienced with all applicable codes and ordinances and responsible for the installation and commission of the equipment.

yThe installation must comply with all local codes and ordinances having jurisdiction and the latest editions of the NFPA 31 and CSA-B139 & B140 in Canada.

NOTICE

50 Hz motors — The burner ratings, air settings and nozzle ratings are based on standard 60 hz motors (at 3450 rpm). Derate all ratings 20% when using 50 hz motors. Consult factory for specific application data.

NOTICE

High altitude installations — Accepted industry practice requires no derate of burner capacity up to 2,000 feet above sea level. For altitudes higher than 2,000 feet, derate burner capacity 2% for each 1000 feet above sea level.

Pre-installation check- list

Protect Against Stray

Light Lockout

Failure to follow these instructions could cause loss of burner operation resulting in no heat, an unplanned process interruption, work stoppage and the potential for frozen plumbing or other cold weather property damage.

yThe control must detect a dark, no-flame condition in order to start the burner or it will hold in the stray light lockout mode.

yShield the burner from direct exposure to intense light.

Protect Against Dust and

Moisture

Wet, dusty environments could lead to blocked air passages, corrosion damage to components, impaired combustion performance and result in asphyxiation, explosion or fire.

yThis burner is designed for clean, dry installations.

yElectrical controls are not protected against rain or sprayed water.

yKeep the installation clear of dust, dirt, corrosive va- pors, and moisture.

yProtective covers and more frequent maintenance may be required.

Adequate Combustion

and Ventilation Air

Supply Required

Failure to provide adequate air supply could se- riously affect the burner performance and result in damage to the equipment, asphyxiation, ex- plosion or fire hazards.

yThe burner cannot properly burn the fuel if it is not supplied with a reliable combustion air source.

yFollow the guidelines in the latest editions of the NFPA 31 and CSA-B139 regarding providing adequate air for combustion and ventilation.

Page 4

6104 BCF3 R02

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Potential for Fire, Smoke and Asphyxiation Hazards To the Professional, Qualified Installer or Service AgencyTo the Homeowner or Equipment Owner Table of Contents Before you begin Agency approvalsPre-installation check- list Follow These Instructions ExactlyProtect Against Stray Light Lockout Protect Against Dust MoistureOil Supply Pressure Control Required Correct Nozzle and Flow Rate Required‰ Verify firing rate Nozzle Capacities‰ Verify air tube Mount the burner Protect the Air Tube From OverheatingDo Not Install By-pass Plug with 1-Pipe System Install Oil Supply To SpecificationsWire the burner R7184 Electrical Shock HazardFuel unit gearset capacities ‰ Burner fuel flowProfessional Installation Service Required Do Not Bypass Safety ControlsKeep Service Access Covers Securely Installed Prepare the burner for start-upInitial indicator adjustment plate settings head position Explosion and Fire Hazard Hot Gas Puff-back Heavy Smoke HazardAnnual Professional Service Required Maintenance and Ser- viceAnnual service by qualified service techni- cian Monthly maintenance by owner Replacement parts Warranty Limited Warranty Information
Related manuals
Manual 36 pages 29.5 Kb

CF375 specifications

The Beckett CF series, encompassing models CF3500A, CF2500A, CF2300A, CF800, and CF375, represents a robust lineup of oil burners designed for residential and commercial heating applications. These models are engineered for efficiency, reliability, and ease of use, making them a preferred choice among HVAC professionals and homeowners alike.

The CF3500A is a high-capacity model that excels in providing consistent heating for larger spaces. With a firing rate of up to 3.5 gallons per hour, it is equipped with advanced nozzle technology that improves fuel atomization, resulting in better combustion efficiency. This model features a compact design, making it easy to install in various settings, and it includes an integrated control module for straightforward operation.

The CF2500A offers impressive performance with a moderate firing rate suitable for mid-sized buildings. It incorporates Beckett's patented Clean Cut design which minimizes smoke and reduces emissions. This model also comes with a diagnostic LED display, allowing for quick identification of system status and potential issues, enhancing maintenance efficiency.

The CF2300A is tailored for smaller applications while still maintaining a strong performance profile. Its compact size does not compromise power, as it utilizes advanced combustion technologies to ensure effective heating. The user-friendly interface allows for effortless adjustments, and its low profile design fits into tight spaces, making it ideal for residential use.

For applications requiring versatility, the CF800 stands out with a multi-fuel capability, allowing it to run on both oil and biodiesel. It boasts an energy-efficient design that contributes to cost savings over time. The CF800's unique air delivery system enhances combustion efficiency, reducing noise levels and improving overall comfort in the living environment.

Finally, the CF375 is designed for high-efficiency performance in professional settings. Its durable construction ensures long-lasting service, and it is equipped with advanced control systems that optimize fuel delivery and combustion. This model is particularly noted for its low emissions, aligning with modern environmental standards while providing reliable heating.

Together, the Beckett CF series exemplifies cutting-edge technology and engineering excellence, catering to diverse heating needs. Each model is a testament to Beckett’s commitment to energy efficiency, performance, and environmental responsibility, making them suitable choices for both residential and commercial heating applications.
Top Page Image Contents