Henkel 9000 Inspection Before Installation, Other Controls, Connecting Air and Product Lines

Page 5

3Installation

Inspection Before Installation

The Loctite Rotospray Pump was inspected before shipment. Check the items in the shipping container against the list on Page 3 of this Manual. After removing the items from the shipping container inspect them for visible damage. Promptly report any damaged or missing parts to both the shipper and your Loctite representative.

CAUTION: DO NOT REMOVE ANY ITEMS THAT ARE SEALED IN PLASTIC BAGS UNTIL THEY ARE TO BE USED AS THEY MAY BECOME CONTAMINATED RESULTING IN PERFORMANCE PROBLEMS.

Installation

Locate the pump so that:

1.The pump axis is horizontal.

2.The pump is at least 12 inches (300 mm) below the outlet of the gravity feed reservoir.

3.The pump is at approximately 4 inches (100 mm) below the centerline of the Rotospray centrifugal force dispensing head.

4.There is enough clearance to allow easy access to the outlet fitting.

5.There is enough clearance to allow easy access to the control air fittings.

6.The Rotospray centrifugal force dispensing head is within the range of the outlet tubing.

Install the pump assembly into the Mounting Bracket (Part no. 983335). Secure the Bracket to the mounting surface with suitable fasteners.

See Fig. 4 on page 13 for the bracket mounting hole dimensions and overall pump dimensions.

Other Controls

1.The pump requires a 4-way pneumatic valve to operate. The valve should have a Cv of 0.5 and 1/8 NPT ports.

2.The pneumatic valve shall have both Manual and Automatic modes of operation.

3.A timing device will be required to operate 4-way valve that controls the pump.

Connecting Air and Product Lines

1.Install the air line fittings into the 1/8 NPT ports in the pneumatic actuator.

2.Connect the normally not passing control valve port to the actuator port closest to the adjustment knob, (“Dispense” port on actuator).

3.Connect the normally passing control valve port to the actuator port farthest from the adjustment knob, (“Retract” port on actuator).

4.Connect 3/8-inch OD tubing from the product reservoir to the pump inlet.

5.Connect 1/4-inch OD tubing from the pump outlet to the applicator being used.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Equipment Table of Contents Retain this Manual for Future Reference Introduction Inspection Before Installation InstallationInstallation Connecting Air and Product LinesView of the Pump with Component Labeled Installation,Rotospray Pump Operating Sequence Theory of OperationAdjusting the Amount Dispensed Adjusting Pump Dispense VolumeOperation Priming the Pump first time useIdle Time MaintenanceRoutine Replacing The Pump Or Actuator Module Maintenance,To Disassemble To AssembleTroubleshooting Guide Problem Cause Solution TroubleshootingReplacement Parts and Assemblies Series 9000 Pump Rebuilding Program Dimensions SpecificationsWeight Specifications,Utilities Required Product Viscosity Range 100 cp 100,000 cp Cycle RateEquipment Warranty Loctite Americas

9000 specifications

Henkel 9000 is a high-performance adhesive that has earned a reputation in various industries for its exceptional bonding capabilities and versatility. This product is part of Henkel’s expansive line of adhesives, designed to meet the varying needs of manufacturers, engineers, and designers alike.

One of the primary features of Henkel 9000 is its rapid curing time. This allows for quick assembly of components, which is crucial in fast-paced production environments. The adhesive utilizes advanced chemistry to achieve strong bonds in a short period, improving overall productivity. Its short setting time also minimizes downtime, making it a preferred choice for assembly lines.

Henkel 9000 showcases remarkable adhesion to a wide variety of substrates, including metals, plastics, and composites. This versatility makes it suitable for applications across different sectors, such as automotive, aerospace, electronics, and consumer goods. The ability to bond dissimilar materials efficiently opens up possibilities for innovative designs and applications.

The adhesive technology behind Henkel 9000 includes a unique formulation that provides high shear strength and toughness. This durability ensures that the bonds can withstand mechanical stresses and environmental exposure, making it an ideal choice for applications where reliability is paramount. Additionally, it exhibits excellent resistance to chemicals and moisture, further extending its usability in challenging environments.

Another noteworthy characteristic is its ease of application. Henkel 9000 can be dispensed through various methods, including manual application or automated machines, allowing for seamless integration into production processes. Its user-friendly nature reduces the likelihood of errors during application, enhancing overall efficiency.

Furthermore, Henkel places a strong emphasis on sustainability. The 9000 series includes formulations that are designed to minimize environmental impact while maintaining high performance. This focus on eco-friendly solutions aligns with industry demands for greener processes and materials.

In summary, Henkel 9000 stands out for its fast curing, strong adhesion to diverse materials, exceptional durability, ease of application, and commitment to sustainability. Its innovative features and technologies make it an essential product for industries aiming to enhance their production processes and product quality. Whether it’s in automotive assembly, electronics manufacturing, or consumer product design, Henkel 9000 continues to revolutionize the way materials are bonded together.
Top Page Image Contents