Stainless steel surfaces

Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction of the steel finish (cross- wise).

Never use steel wool, metal sponges or other abrasive cleaning agents.

Cleaning of gas burner

Clean the control panel and knobs plus the pan grid, as well as burner caps and rings, with ordinary cleansing agents.

Never use scouring powder, Brillo pads, metal pads or other scouring agents on enamelled or painted surfaces!

Care must be taken to avoid boil-over

If water accidentally gets into the edge of the burner head (boil-over) the water must be removed with a lint-free cloth before the burner is turned on again. Likewise, caps and grids must be thoroughly wiped off before the gas ring is used again so that the boil-over does not permanently scar the enamel or paint.