Beckett 7559 Sequence of Operation, Burner States, Reset and Service by Qualified Technician only

Page 6

Sequence of Operation

WARNING Fire Hazard

Reset and Service by Qualified Technician only.

Burner States

1.Standby: The burner is idle, waiting for a call for heat.

2.Valve-On Delay: The igniter and motor are on while the control delays turning on the oil solenoid valve for the programmed time.

3.Trial For Ignition: The oil solenoid valve is energized. A flame should be established within the factory set trial for ignition time (“lockout time”).

4.Lockout: The control has shut down for one of the following safety reasons:

a.The trial for ignition (lockout) time expired without flame being established.

b.The cad cell detected flame at the end of the Valve On Delay state.

c.The pre-set time allotment for relighting is exceeded.

d.Failed welded relay check.

If the control detects a welded motor contact, the motor only will cycle 5

seconds on, 5 seconds off, 3 times before locking out.

To reset the control from lockout interrupt power for at least 2 seconds.

5.Ignition Carryover: Once flame is established, the igniter remains on for 10 additional seconds to ensure flame stability.

6.Run: The flame is sustained until the call for heat is satisfied. The control then switches to Motor-Off Delay,

if applicable, or it shuts down and returns to Standby.

7.Relight: If the flame is lost while the burner is firing, the control immediately repeats the ignition sequence. The control will continue to Relight each time the flame is lost, until it reaches a pre-set time allotment. The control will then

go into Lockout instead of Relight. This feature prevents excessive accumulation of oil in the equipment’s combustion chamber.

8.Motor-Off Delay: If applicable, the oil solenoid valve is turned off and the control delays turning the motor off for the set motor-off delay time before the control returns to standby. Note that to utilize the motor off delay, power must remain to the red wire after the call for heat ends. (Enable input turned off, see Figure 2.)

1

Standby

2

Valve-on

delay

8

Motor-off

delay

3

Trial for ignition

5

Ignition

carryover

6

Run

4

Lockout

7

Relight

6

Image 6
Contents GeniSys Description / ApplicationsFeatures SpecificationsInstallation/Operation/Maintenance MountingElectrical shock can cause severe personal injury or death Getting to know the control Startup / Checkout WiringCheck Safety Features Starting the SystemReset and Service by Qualified Technician only Sequence of OperationBurner States Priming the Pump Resetting From LockoutMaintenance HazardLimited Warranty Information

7559 specifications

Beckett 7559 is an advanced pump system designed for residential and commercial applications where efficient water management is essential. Known for its durability and reliability, the Beckett 7559 integrates several cutting-edge technologies, making it a popular choice among homeowners and industry professionals alike.

One of the standout features of the Beckett 7559 is its powerful motor, which is engineered to deliver high performance while maintaining energy efficiency. The motor operates at a low noise level, ensuring that the pump does not disrupt the tranquility of residential or garden environments. This makes it ideal for applications such as water fountains, ponds, and other water features where noise could be a concern.

The Beckett 7559 is equipped with a thermally protected motor that safeguards against overheating, extending the life of the pump and minimizing maintenance requirements. The unit also includes an integrated flow rate control, which allows users to customize water flow according to their specific needs. This feature not only enhances versatility but also optimizes water usage, contributing to eco-friendly practices.

Another remarkable characteristic of the Beckett 7559 is its robust construction. The pump is constructed with corrosion-resistant materials, ensuring that it can withstand exposure to various environmental factors, including water chemicals and changing weather conditions. This resilience makes the Beckett 7559 an excellent choice for use in tough outdoor conditions while maintaining aesthetic appeal.

The design of the Beckett 7559 also allows for easy installation and maintenance. The user-friendly interface ensures that even those with limited technical knowledge can set up and manage the pump with ease. Moreover, a variety of connectors and fittings are often included, making it compatible with a wide range of systems and configurations.

In summary, the Beckett 7559 stands out in the market for its powerful and energy-efficient motor, thermal protection features, customizable flow rate control, and durable construction. Designed for reliability and ease of use, it remains a top choice for effective water management in various applications. Whether for decorative ponds, fountains, or effective drainage solutions, the Beckett 7559 promises efficient performance and long-lasting use.